Sony FWD-50PX2 Auto Shut Off, Auto Screen Adjust, Information, IP Address Setup, Speed Setup

Page 20

Using On-screen Menus

Auto Shut Off

When you set this item to “On,” the display unit automatically enters the standby mode when a signal is not input to the COMPONENT or DVI input connectors for more than about five minutes. The display unit automatically enters the power saving mode when a signal is not input to the DVI or RGB input connectors for more than about thirty seconds. While in the standby mode, press the 1POWER switch on the display unit or the POWER ON button on the Remote Commander to switch the display unit on. While in the power saving mode, the display unit is automatically turned on when a signal is input.

Auto Screen Adjust

When “Auto Screen Adjust” is set to On, it saves the screen-settings for size and positioning for each input signal on the unit and automatically detects the last setting in memory each time input signals are switched.

When “Auto Screen Adjust” is set to Off, this auto adjustment is set disabled. Even when input signals are switched, the original factory settings operate.

Information

This menu is used for displaying various information, including information on the internal status of the display unit.

INITIAL SETUP/INFORMATION

Information

Model Name:

Serial Number:

Operation Time:

Software Version:

Select

Set ENTER

Exit

MENU

Model Name

Indicates the model name.

Serial Number

Indicates the serial number.

Operation Time

Indicates the total number of hours of operation.

Note

Time spent in standby mode is not counted as part of the Operation Time.

Software Version

Indicates the system software version.

IP Address Setup

Sets an IP address for communication between the display unit and an optional adaptor with network management capability (such as BKM-FW32, BKM- FW50).

DHCP: Automatically obtain an IP address.

Manual: Manually configure an IP address.

For details, see “Setting an IP Address and communication speed” on page 42 (GB).

Speed Setup

Sets the communication speed between the display unit and an optional adaptor with network management capability (such as BKM-FW32, BKM- FW50).

For details, see “Setting an IP Address and communication speed” on page 42 (GB).

Note

These setting items appear on the menu only when an optional adaptor with network management capability is installed in the OPTION1 slot.

All Reset

This menu is used to reset all adjustment and setting values to the factory default condition.

20 (GB)

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Flat Panel Display FWD-50PX2/50PX2AFor customers in the U.S.A For customers in CanadaTable of Contents Setting up the Multi Display Adjusting the Sound QualityAdjusting Color Matrix Controlling Power On/Off Automatically Timer FunctionPrecautions SVT Location and Function of Parts and Controls Front / Rear / Left sideIndicator Section Control Button Section TopConnector Panel COMPONENT/RGB Input Adaptor BKM-FW11 Optional adaptors Not suppliedVideo/S-Video Input/Output Adaptor BKM- FW10 Remote Commander RM-980 RGB/COMPONENT Active Through Adaptor BKM-FW12Installing batteries M//,/ENTER buttonsWhen mounting the display horizontally Connecting the Speakers Connecting the AC Power CordPrecautions to avoid/reduce burn-in and picture retention ConnectionsCable management Using the cable holdersTo remove the AC power cord Using On-screen Menus Operating Through MenusMenu Guide PICTURE/SOUND Control menuScreen Control menu Picture and Picture PAP menuCustom Setup menu Initial SETUP/INFORMATION menu Input SettingRemote LanguageAuto Screen Adjust IP Address SetupSpeed Setup All ResetTIMER/CLOCK menu Screen Saver menuSwitching the Input Signal Watching the PictureInput Signal, Picture Mode and Display Status Information To display the informationComputer signals Actual on-screen display of the unit’s statusAdjusting the Picture Selecting Image QualityContrast BrightnessPhase SharpnessNoise Reduct Dynamic PictureTo cancel the reset function Gamma CorrectSetting Auto Wide Identification Control SignalPicture Enlargement Original Picture Enlarged Picture Picture TypeSetting the Aspect Adjusting the Size, Position, or the Pixels of the Picture Dot PhaseAdjusting automatically Adjusting manuallyShift Total H PixelSize Viewing two pictures at the same time When P&P is selectedWhen PinP is selected Adjusting the position of the inset picture For PinP only Zooming in on a pictureSetting up the Multi Display Adjusting the Sound Quality Adjusting the Treble, Bass, and Balance, etcAdjusting Color Matrix Selecting the On-screen LanguageDisplaying the time Controlling Power On/Off Automatically Timer FunctionAdjusting the time and the day On/Off Timer Function Screen Saver Function Reversing the Color Tones of the ImageWhen both Pic Inversion and Pic. Orbit are set to on Changing the Image Position AutomaticallyAdjusting the brightness of background of picture To cancel All WhiteTo cancel Auto Dimmer Turning the screen all whiteSetting an IP address and communication speed Setting an IP address manually ManualSetting a communication speed Speed Setup Self-diagnosis FunctionOperating a Specific Display With the Remote Commander To change the index numberTroubleshooting Problem Cause RemedyDisplay, and that the ventilation Input is set to Fix Specifications Video processingInputs and Outputs VIDEO/S Video input/output adaptor BKM-FW10RGB/COMPONENT connector D-sub 15-pin Pin assignmentソニー株式会社 141-0001東京都品川区北品川6-7-35

FWD-50PX2A, FWD-50PX2 specifications

The Sony FWD-50PX2 and FWD-50PX2A are exceptional professional display models designed for various commercial applications, including retail environments, public information kiosks, and corporate settings. These displays are renowned for their vibrant image quality, advanced technologies, and robust build, making them suitable for a range of digital signage needs.

One of the standout features of the FWD-50PX2 series is the high-resolution plasma panel. With a resolution of 1366 x 768 pixels, the display provides crisp images and stunning detail. The plasma technology also ensures deep blacks and vibrant color reproduction, resulting in impressive visuals that capture attention and encourage engagement.

The FWD-50PX2 and its counterpart, the FWD-50PX2A, also incorporate Sony’s unique Bravia Engine technology. This advanced image processing engine enhances picture quality by optimizing contrast, color, and sharpness in real-time. This means that whether you’re displaying static images, videos, or dynamic content, viewers will enjoy a superior visual experience.

An essential characteristic of these displays is their exceptional readability under various lighting conditions. The anti-glare treatment ensures that images remain clear and visible even in bright environments. This makes the FWD-50PX2 series particularly effective for use in retail spaces, where ambient lighting can sometimes hinder visibility.

In terms of connectivity, the FWD-50PX2 and FWD-50PX2A offer a range of options, including HDMI, VGA, and DVI inputs, making integration with different media sources seamless. This versatility allows users to connect various devices such as computers, video players, and digital signage players without hassle.

Both models also support multiple orientation setups, enabling landscape and portrait arrangements. This flexibility allows businesses to tailor their display configurations to suit specific environments or content requirements.

Durability is another critical aspect of the FWD-50PX2 series. Designed for continuous operation, these displays can withstand the demands of busy commercial environments. Their build quality ensures longevity, reducing the need for frequent replacements.

In summary, the Sony FWD-50PX2 and FWD-50PX2A displays are powerful tools for businesses looking to enhance their visual communications. With high-resolution clarity, advanced image processing, robust connectivity options, and flexible installation capabilities, they meet the diverse needs of today's digital signage applications.
Top Page Image Contents