Sony FWD-50PX2A Initial SETUP/INFORMATION menu, Remote, Input Setting, Language, Color System

Page 19

•With Sync On Green, if the unit is not set to accept synchronizing signals, the image will not be displayed.

•Signals of the synchronous mode can be supported only with INPUT2.

•Sync Mode settings cannot be carried out for the input through the option boards.

•This unit does not support the three value sync format of composite sync and 576/60P.

•When you select the video signal for the synchronous mode setting, you cannot use the PICTURE AND PICTURE function.

Remote

This menu is used for remote control settings.

Index Number

Sets the index number of the display.

Note

When you set the index number, use the buttons on the display unit. The index number cannot be set with the Remote Commander.

For details on the Index Number, see “Operating a Specific Display With the Remote Commander” on page 44 (GB).

Control Mode

Selects the function of the Remote Commander. Display + Remote: Activates a remote commander

supplied with the display.

Display Unit Only: Disables the remote control function. You can only make settings for the display using the control buttons on the display unit.

Remote Only: Disables the controls on the display unit when you want to control it using the Remote Commander only. You can only make settings for the display using the Remote Commander.

Note

When operating this item, the modes you can select differ depending on the key you are using.

When using ENTER on the Remote Commander for setting, you can select only “Display + Remote” or “Remote Only.”

When using ENTER on the display unit for setting, you can select only “Display + Remote” or “Display Unit Only.”

Using On-screen Menus

Input Setting

This menu is used to determine whether the input selector buttons on the remote control (INPUT2, OPTION1, OPTION2) act as toggles (such as for example switching INPUT2 between RGB and COMPONENT) or as fixed selectors.

Selectable: Each input selector button on the remote control (INPUT2, OPTION1, OPTION2) toggles between two input types with each press (such as INPUT2: RGB t COMPONENT t RGB t COMPONENT...).

Fix: The currently selected input (as shown on the display) is fixed to the current setting. (For example, when RGB input is selected, the current input will be fixed to RGB.)

This setting also applies to the operation when the CONTROL S connector is used.

INITIAL SETUP/INFORMATION menu

You can select the on-screen language or the input signal, or display various information such as the Operation Time.

INITIAL SETUP/INFORMATION

 

 

 

 

 

 

 

Language:

English

 

 

Color System:

Auto

 

 

Auto Shut Off:

Off

 

 

Auto Screen Adjust:

On

 

 

Information

 

 

 

IP Address Setup

 

 

 

Speed Setup

 

 

 

All Reset

 

 

 

 

 

 

 

Select

Set ENTER

Exit MENU

Language

Selects the on-screen language (Japanese, English, German, French, Spanish, or Italian).

For details, see “Selecting the On-screen Language” on page 36 (GB).

Color System

Selects the Color System of video signals. Auto: to set the Color System automatically. NTSC: to display NTSC signals NTSC4.43: to display NTSC4.43 signals PAL: to display PAL signals

SECAM: to display SECAM signals

PAL-M:to display PAL-M signals

PAL-N:to display PAL-N signals

PAL60: to display PAL60 signals

19 (GB)

Page 18 Page 20
Image 19
Page 18 Page 20
Contents FWD-50PX2/50PX2A Flat Panel DisplayFor customers in Canada For customers in the U.S.ATable of Contents Controlling Power On/Off Automatically Timer Function Setting up the Multi DisplayAdjusting the Sound Quality Adjusting Color MatrixPrecautions SVT Front / Rear / Left side Location and Function of Parts and ControlsControl Button Section Top Indicator SectionConnector Panel Video/S-Video Input/Output Adaptor BKM- FW10 Optional adaptors Not suppliedCOMPONENT/RGB Input Adaptor BKM-FW11 RGB/COMPONENT Active Through Adaptor BKM-FW12 Remote Commander RM-980M//,/ENTER buttons Installing batteriesWhen mounting the display horizontally Connections Connecting the SpeakersConnecting the AC Power Cord Precautions to avoid/reduce burn-in and picture retentionTo remove the AC power cord Using the cable holdersCable management PICTURE/SOUND Control menu Using On-screen MenusOperating Through Menus Menu GuidePicture and Picture PAP menu Screen Control menuCustom Setup menu Language Initial SETUP/INFORMATION menuInput Setting RemoteAll Reset Auto Screen AdjustIP Address Setup Speed SetupScreen Saver menu TIMER/CLOCK menuWatching the Picture Switching the Input SignalTo display the information Input Signal, Picture Mode and Display Status InformationActual on-screen display of the unit’s status Computer signalsBrightness Adjusting the PictureSelecting Image Quality ContrastDynamic Picture PhaseSharpness Noise ReductGamma Correct To cancel the reset functionOriginal Picture Enlarged Picture Picture Type Setting Auto WideIdentification Control Signal Picture EnlargementSetting the Aspect Adjusting manually Adjusting the Size, Position, or the Pixels of the PictureDot Phase Adjusting automaticallySize Total H PixelShift When PinP is selected When P&P is selectedViewing two pictures at the same time Zooming in on a picture Adjusting the position of the inset picture For PinP onlySetting up the Multi Display Adjusting the Treble, Bass, and Balance, etc Adjusting the Sound QualitySelecting the On-screen Language Adjusting Color MatrixAdjusting the time and the day Controlling Power On/Off Automatically Timer FunctionDisplaying the time On/Off Timer Function Reversing the Color Tones of the Image Screen Saver FunctionChanging the Image Position Automatically When both Pic Inversion and Pic. Orbit are set to onTurning the screen all white Adjusting the brightness of background of pictureTo cancel All White To cancel Auto DimmerSetting an IP address manually Manual Setting an IP address and communication speedSelf-diagnosis Function Setting a communication speed Speed SetupTo change the index number Operating a Specific Display With the Remote CommanderProblem Cause Remedy TroubleshootingDisplay, and that the ventilation Input is set to Fix VIDEO/S Video input/output adaptor BKM-FW10 SpecificationsVideo processing Inputs and OutputsPin assignment RGB/COMPONENT connector D-sub 15-pinソニー株式会社 141-0001東京都品川区北品川6-7-35

FWD-50PX2A, FWD-50PX2 specifications

The Sony FWD-50PX2 and FWD-50PX2A are exceptional professional display models designed for various commercial applications, including retail environments, public information kiosks, and corporate settings. These displays are renowned for their vibrant image quality, advanced technologies, and robust build, making them suitable for a range of digital signage needs.

One of the standout features of the FWD-50PX2 series is the high-resolution plasma panel. With a resolution of 1366 x 768 pixels, the display provides crisp images and stunning detail. The plasma technology also ensures deep blacks and vibrant color reproduction, resulting in impressive visuals that capture attention and encourage engagement.

The FWD-50PX2 and its counterpart, the FWD-50PX2A, also incorporate Sony’s unique Bravia Engine technology. This advanced image processing engine enhances picture quality by optimizing contrast, color, and sharpness in real-time. This means that whether you’re displaying static images, videos, or dynamic content, viewers will enjoy a superior visual experience.

An essential characteristic of these displays is their exceptional readability under various lighting conditions. The anti-glare treatment ensures that images remain clear and visible even in bright environments. This makes the FWD-50PX2 series particularly effective for use in retail spaces, where ambient lighting can sometimes hinder visibility.

In terms of connectivity, the FWD-50PX2 and FWD-50PX2A offer a range of options, including HDMI, VGA, and DVI inputs, making integration with different media sources seamless. This versatility allows users to connect various devices such as computers, video players, and digital signage players without hassle.

Both models also support multiple orientation setups, enabling landscape and portrait arrangements. This flexibility allows businesses to tailor their display configurations to suit specific environments or content requirements.

Durability is another critical aspect of the FWD-50PX2 series. Designed for continuous operation, these displays can withstand the demands of busy commercial environments. Their build quality ensures longevity, reducing the need for frequent replacements.

In summary, the Sony FWD-50PX2 and FWD-50PX2A displays are powerful tools for businesses looking to enhance their visual communications. With high-resolution clarity, advanced image processing, robust connectivity options, and flexible installation capabilities, they meet the diverse needs of today's digital signage applications.
Top Page Image Contents