CHANGING CHANNELS (continued)
There are other ways to change channel:
•Use the browsing bar at the bottom of the screen (see below)
•Use the
•Use the programme guide (see page 19)
CHANGING THE VOLUME
You can increase or decrease the volume by using the 
and 
buttons on the remote control (or the 
and 
buttons on the front of the receiver). The sound is silenced by pressing the
button and restored to its previous level by pressing the 
button again.
HINT: The mute control also affects the sound supplied to the VCR SCART socket, and so using this control while a programme is being recorded will affect the recording.
BROWSING BAR
Whenever you change channel, the Plaza HD•S2 briefly displays a browsing bar at the bottom of the screen that contains information about the current channel and programme. You can press the 
button at anytime to display the bar again.
It shows:
•the name and number of the channel
•the name of the programme you are watching
•the start and finish time of the programme
•the progress through the programme
•the date and time
HINT: You can also display the browsing bar by pressing 
or 
on the remote control while you are watching TV.
The information bar may also display symbols to indicate:
The programme is in High Definition. Subtitles are available.
Audio Description is available. Dolby Digital audio is available.
Parental guidance is advised as the programme contains language or scenes that may not be suitable for children. The channel is locked (see the Advanced Use section).
An HD version is available on another channel (press 
for further details).
16