SWITCHING ON (continued)
Turn on your TV set and choose the HDMI input (see your television’s manual for guidance).
After a few seconds, the receiver’s first Freesat installation screen shown below will appear on the television screen:
HINT: If you do not see this screen on your television, see ‘Troubleshooting’ on page 40.
Switch on the mains socket the Plaza HD•S2 is connected to.
TUNING IN
When the first installation screen is displayed, use the 
or 
buttons to select the screen format of your television (16:9 Widescreen or the squarer 4:3 Traditional). Then press the 
button to highlight the HDMI Resolution selection box, and use the 
or 
buttons to select the correct resolution for your television. Press 
to select the “Next” button and then press 
to display the next installation screen.
12