Manhattan Computer Products PLAZA HD-52 manual Setting UP for on Demand TV

Page 32
On Demand TV

5This section explains how to set up the Plaza HD•S2 to watch On Demand TV services, such as the BBC iPlayer and ITV Player catch-up services. You must have a broadband Internet connection in your home to watch on demand TV.

HINT: You can read the latest information about Freesat online TV services on the Freesat information page on channel 999.

SETTING UP FOR ON DEMAND TV

Ensure the ETHERNET socket at the back of the Plaza HD•S2 is connected to your router or hub. See the Connecting your receiver section (page 10) for more information.

HINT: If the receiver has made a connection with your modem or home network, one or both of the small green and orange lights immediately above the RJ-45 socket will light and/or flicker.

Press the button on the remote control and then press to display the System menu. You should check that the Network Configuration menu option shows “DHCP” to automatically configure the network connection.

32

If your broadband modem/router is not compatible with DHCP (Dynamic Host Configuration Protocol), you will need to set the

addresses manually. Use the or buttons to change the configuration to “Static” and for each of the addresses in turn (IP Address, Subnet Mask, Router Address, and DNS Address) press to highlight the address and then the red button to edit the address.

Highlight each of the four “octets” that is to be changed, enter the number required using the number buttons, and press to confirm that address. When all four addresses have been set

correctly, press to set the configuration and return to the system menu page.

HINT: Consult the manual or supplier for your modem/ router or network for help choosing the correct addresses.

Image 32
Contents Started Welcome to Freesat Phone 020 8450Contents Non-Freesat Channels Setting up for on demand TV Watching on demand TVOn Demand TV 1In The Box Your Receiver Manhattan Plaza HDS2 FrontChannel Change UP/DOWN StandbyManhattan Plaza HDS2 Rear Remote Control Page Satellite Dish Connecting Your Receiver2Preparation Switching on Switching on TuningWhen the signal lock is successful, press to proceed Postcode, press the button and then press to proceedTuning Turning on the Receiver Changing ChannelsBrowsing BAR Changing the VolumeChanging Channels Subtitles and Audio Description Regional Channels Using the Channel ListSearching for a Channel Using the Programme Guide Pressing , or press to leave the region setting unchangedUsing the Programme Guide Interactive TV Services 4Advanced Use Using the Favourites ListsPress to cancel Page Display Mode Lock PINTV/DTV Changing the Channel ListLeave the menu system by pressing or Using the Setup MenusGeneral Menu Section Picture Menu Section SubtitlesSubtitle Language InformationDisplay Mode Hdmi ResolutionScart Mode Screen TypeLIP-SYNC Delay Sound Menu SectionAudio Language Dolby DigitalTime Menu Section System Menu Section Lock Online Content Software Update VIA OADSoftware Update VIA USB Restore Factory DefaultSetting UP for on Demand TV Watching on Demand TV Watching on Demand TV Tuning in NON-FREESAT Channels 6Non-Freesat ChannelsBy pressing or Press the button to switch to the channel you last watchedWatching NON-FREESAT Channels Whether it was a freesat or non-freesat channel Appendix a Safety Blue Neutral Brown Live Electrical SafetyProtecting the Environment Appendix B Troubleshooting Services not available on chosen channel Configuration in system menuTuned to an SD channel Tune to an HD channel You are on a non-Freesat channel Select a Freesat channelDVB-S/S2 TV CVBS/RGBPage Helpline 020 8450