You can check that the receiver has successfully connected to the Internet from the technical information page. Press 
to display the General menu (or, if you are no longer on the System menu
page, first press 
) and use the 
button to highlight the “Information” option, then press 
.
If the IP address item shows a number in four sections separated by dots, then the receiver is connected to your local network. If online services still do not work, you should check your router’s connection to the internet. If “Not Connected” is shown, you should carefully check the broadband connection and the Network Configuration.
WATCHING ON DEMAND TV
You can switch to On Demand TV either through the interactive services on a channel providing online TV, or through an online channel chosen by number or using the channel list or programme guide.
HINT: The online TV channels are numbered from 900 and are in the On Demand section of the programme guide
When you switch to an On Demand TV channel, it may take a few seconds longer to show the picture than a Freesat satellite channel. You will then need to progress through a series of menus, using the number buttons, the coloured buttons, 
, 
, 
and 
, and the 
button, to find and start the programme you want to watch. You go through these menus in a different way depending on the online broadcaster.
33