Sylvania LD190SS1 owner manual Channel List Manual Register, Using CH K/L

Español Français English

Channel List	Manual Register
The channels selected here can be skipped when selecting the channels	This function lets you add the channels that were not added by
using [CH K/L].	the autoscan due to the receptible condition at the initial setting.
Those channels can still be selected with [the Number buttons].

INTRODUCTION

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “CHANNEL”, then press

[ENTER].

3 Use [Cursor K/L] to select “Channel List”, then press [ENTER].

Channell

Autoscan

Channel List

Manual Register

Antenna

4 Use [Cursor K/L] to select the channel you want to remove, then press [ENTER].

Channell Listi

Highlight channels for Ch
	DTV	6
Up/Down key selection.
		27
	DTV	8
		9
	DTV	48
		58
	DTV	67
Ch Select ENTER Watch/Skip	BACK
	Back

•The channel display for the removed channel

darkens. You will not be able to select the channel again using [CH K/L].

•To reactivate a removed channel, use [Cursor K/L] and press [ENTER]. The registered channels are highlighted.

•When you remove a main channel, its subchannels are removed as well.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

5 Press [SETUP] to exit.

					PREPARATION
1 Press [SETUP] to display the main menu.
2 Use [Cursor K/L] to select “CHANNEL”, then press
	[ENTER].				WATCHING
					TV
					OPTIONAL
3 Use [Cursor K/L] to select “Manual Register”, then
					SETTING
	press [ENTER].
		Channell
		Autoscan			OPERATING
		Channel List
		Manual Register
		Antenna			DVD
4 Use [the Number buttons] to enter the number of the
	channel you want to add, then press [ENTER].				DVD
					SETTING
			11
		Manuall Registeri
		For analog channels, select a		Register
		channel to register using number			TROUBLESHOOTING
		keys.
		For digital channels, you must
		perform Autoscan function.
		Ch Change	BACK
				Back
5 Press [SETUP] to exit.
					INFORMATION
	Note:

•If setup completes successfully,

“Added to the channel list” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•By using [CH K/ L], you can select the memorized channels only.

21

EN