OPERATING DVD
OFF (no subtitles)
ENG (English subtitles)
FRE (French subtitles)
3 Press [BACK] to exit.
Note:
•To cancel the subtitle, select “OFF” at step 2.
•If your language is not shown after pressing
[Cursor K / L] several times, the disc may not have that language. However, some discs allow you to change subtitle languages setting in the disc menu. (Operation varies depending on the disc, so refer to the manual along with the disc.)
•When “NOT AVAILABLE” appears on the TV screen, it means no subtitle is recorded on the scene.
•If you choose a language that has
•Ejecting the disc will cancel your subtitle setting.
Camera Angles
DVD
Some DVD may contain scenes which have been shot simultaneously from various angles. You can change the camera angle if “ ” appears on the screen. If “ANGLE ICON” is set to “OFF” in “OTHERS” menu, “ ” will not appear. Refer to page 47.
1 During playback, press [MODE] repeatedly until ““ appears.
2 Use [Cursor K/ L] repeatedly until your desired camera angle appears.
1 / 8 (ANGLE)
or
angles can be varied on the displayed number.
3 Press [BACK] to exit.
Audio Language
DVD
This unit allows you to select an audio language (if multiple languages are available) during DVD playback.
During playback, press [AUDIO] repeatedly until the desired language appears.
1.ENG Dolby D 3/2.1ch 48k/3
audio can be varied on the displayed number.
current audio language.
•Each time you press [AUDIO], the audio language changes as example below.
ENG (English audio)
SPA (Spanish audio)
FRE (French audio)
...
Note:
•Some discs will only allow you to change the audio setting from the disc menu. Refer to the manual accompanying the discs for details.
•If your language is not shown after pressing [AUDIO] several times, the disc may not have that language.
However, some discs allow you to change multiple audio languages setting in the disc menu. (Operation varies depending on the disc, so refer to the manual along with the disc.)
•When “NOT AVAILABLE” appears on the TV screen, it means
audio language is not available.
Black Level Setting
DVD
Adjust the black level to make the dark areas of the TV picture brighter.
1 During playback, press [MODE] repeatedly until “ ” appears.
OFF (BLACK LEVEL)
2 Press [Cursor K/ L] to adjust the black level.
ON (BLACK LEVEL)
or
ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.
3 Press [BACK] to exit.
Note:
• The setting will be kept even if the unit is turned off.
42
EN