Sylvania CD130SL8 Optional Setting, 5Channel Add/Delete, 5Picture Adjustment, Cursor Cursor B

OPTIONAL SETTING

5Channel Add/Delete

The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels.

1Press [SET-UP]to display the main menu.

2Use [Cursor K / L] to select “CHANNEL SETUP”, then press [ENTER].

e.g.) digital TV mode

--- TV SETUP ---

or

CHANNEL SETUP

V-CHIP SETUP

LANGUAGE [ENGLISH]

CAPTION [OFF]

DTV SETUP

3Use [Cursor K / L] to select “ADD/DELETE(DTV)” or “ADD/DELETE”, then press [ENTER].

e.g.) digital TV mode

or	--- CHANNEL SETUP ---
	ADD/DELETE (DTV)
	AUTO PRESET CH (DTV)
	AUTO PRESET CH (TV/DTV)
	AUTO PRESET CH (CATV)
	! CATV takes approx. 50min.

4Select the channel you want to add or delete. (Refer to “Channel Selection“ on page 13.)

e.g.) digital TV mode

D12

5Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.

1Press [PICTURE/SLEEP] repeatedly until the desired picture menu appears.

[SLEEP]

[BRIGHT]

[CONTRAST]

[COLOR]

[TINT]

[SHARPNESS]

2Within 10 seconds, use [Cursor { / B] to adjust the quality.

or

	[Cursor {]	[Cursor B]
BRIGHT	to decrease brightness	to increase brightness
CONTRAST	to decrease contrast	to increase contrast
COLOR	to decrease color	to brighten color
TINT	to add purple	to add green
SHARPNESS	to make soft	to make clear

ADD/DELETE : DTV

5Press [ENTER] repeatedly to select “ADD” or “DELETE”.

•To add or delete another channels, repeat steps 4 to 5.

•Color of channel number displayed at the right top of the TV screen indicates;

-Blue: The selected channel will be added.

-Red: The selected channel will be deleted.

6Press [SET-UP]to exit.

Note:

•“ADD/DELETE (DTV)” or “ADD/DELETE (TV)” menu will dis- appear automatically in about 10 seconds.

•In the digital mode (DTV), you can add or delete channels only for major channel.

•Once you delete a DTV channel, you cannot recover the channel without performing auto channel scan again. (Refer to “Auto Channel Scan” on page 12.)

16

EN