Channel SET UP, Auto Channel Programming

CHANNEL SET UP

AUTO CHANNEL PROGRAMMING

As the initial setting, this unit has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory.

1 Press [SETUP] then press [K] or [L] to point to “CHANNEL SET UP”.

- TV SET UP -

B CHANNEL SET UP

V-CHIP SET UP

SETUPLANGUAGE [ENGLISH]

CAPTION [OFF]

BACK LIGHT [BRIGHT]

2 Press [ENTER] then press [K] or [L] to point to “AUTO PRESET CH”.

ADDING/DELETING CHANNELS

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

1 Press [SETUP] then press [K] or [L] to point to “CHANNEL SET UP”.

	- TV SET UP -
SETUP	B CHANNEL SET UP
	V-CHIP SET UP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
	BACK LIGHT [BRIGHT]

2 Press [ENTER] then press [K] or [L] to point to “ADD/DELETE CH”.

	– CHANNEL SET UP –
	B ADD / DELETE CH (CATV)
ENTER	AUTO PRESET CH
ENTER

OPERATION AND SETTINGS

ENTER

– CHANNEL SET UP –

ADD / DELETE CH (CATV) B AUTO PRESET CH

3 Press [ENTER] then press the Number but-

3 Press [ENTER].

ENTER

•The tuner scans and memorizes all the active channels in your area.

•The tuner stops on the lowest memorized channel.

NOTE

•When “AUTO PRESET CH” is activated where there is no TV signal input, “NO TV SIGNAL” will appear on the display after the completion of channel scanning.

•The unit may recognize CATV channels to be TV channels if reception condition is poor. In this case, check the antenna connection and try “AUTO PRESET CH” again when reception conditions are better.

•Channel memory programming is NOT nec- essary when connected to a cable box or satel- lite box. Just select the channel for cable box or satellite input (ex. CH3) on the unit, then select your desired channel on the cable box or satellite box.

tons or [CH. K / L] to select the desired channel number.

	1	2	3
ENTER	4	5	6
ENTER	7	8	9
	7	8	9
			+100
		0	+10	ADD/DELETE

4 Press [ENTER] then the channel number turned to red. The channel is deleted from memory. If the channel number turned to blue, the channel is added into memory.

ENTER

•To delete another channel, repeat steps 3 to 4.

•If you press [ENTER] again, the channel is memorized again.

Added channel : Light blue

Deleted channel : Light red

5 Press [SETUP] to exit the menu.

SETUP

NOTE

•To confirm that channel(s) has been deleted or added, use [CH. K / L].

TV SECTION

- 13 -