LISTENING TO THE RADIO
1.Set the FUNCTION switch to RADIO.
2.Select the desired radio band with the BAND switch.
3.Tune in a desired station by turning the TUNING control.
4.To turn the radio off, set the FUNCTION switch to TAPE/OFF or CD or LINE IN.
To receive FM stereo broadcasts
Set the FM MODE select switch (the back of the unit) to ST.
-If the signal from an FM stereo station is weak and reception is poor, set the FM MODE select switch to MONO. The reception may be improved, but the sound will be monaural.
To improve reception
FM: Pull out the telescopic aerial and adjust its position.
AM: Rotate the unit.
RECORDING
Recording copyright material without permission of the copyright owners is usually an infringement. If you wish to
When beat is heard
Beat (a
Recording from CD (Synchronous
recording)
1.Load a blank cassette.
2.Set the FUNCTION switch to CD.
3.Load a CD to be recorded.
-Select the track if required.
-For programmed recording, pro- gramme the material in advance.
4.Press the REC button. The PLAY button is engaged simultaneously and recording starts.
5.Press the STOP/EJECT button to stop recording at any time. When the end of the tape is reached, deck stop automatically and the playback of CD enters stop mode.
Recording from the radio or other sources
1.Load a blank cassette.
2.Tune in the radio station to be recorded or play other sources.
3.Press the REC button to start recording.
4.Press the STOP/EJECT button to stop recording.
Safeguards against accidental erasure
To protect side A, break out tab (1). To protect side B, break out tab (2).
-To erase or record a protected cassette, cover
the tab openings with adhesive tape (3). Note:
The REC button cannot be depressed when using a protected cassette.
- 7 -
540AU.indd 7
2009.4.8 10:11:22 AM 