Playing a Disc, Basic Playback, Getting Started

PLAYING A DISC

POWER PICTURE SELECT EJECT

	3
SKIP	ZOOM	MUTE
REV	PLAY	FWD
REV		FWD
	STOP
PAUSE SLOW		DISC
PAUSE SLOW		MENU
DISPLAY
	ENTER
SETUP	TITLE	RETURN

•Shaded buttons are used for following operation.

BASIC PLAYBACK

GETTING STARTED

Turn on the power of amplifier and any other compo- nents, if necessary.

1 Press [POWER] then the power will turn on.

POWER

2 Open the disc door manually.

3 Insert a disc with the label facing back of the unit to start playing it. By simply placing the disc gently into the slot, it will be loaded automatically.

•Playback will start from the first chapter/track of the disc.

•If the playback does not start automatically, press [PLAY O].

•When you playback a DVD which features a title menu, it may appear on the screen. In this case, refer to “TITLE MENU” on page 19.

4 Press [STOP C] to stop playback.

STOP

5 Press [EJECT A] to remove the disc from the unit.

EJECT

NOTE

•When the DVD mode has been switched to the TV mode, the DVD mode shuts down first and then the TV picture and sound appears in about 4 seconds. Similarly, when [POWER] is pressed to turn off in the DVD mode, this mode shuts down first and then the unit is turned off.

•“ ” may appear at the top-right on the TV screen during operation, warning that a pro- hibited operation has been encountered by the DVD or the disc.

•With DVDs that use titles for playback pro- gram signals, playback may start from the second title or it may skip these titles.

•During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

MP3 PLAYBACK

1 In stop mode, press [DISC MENU], then press [K] or [L] to select the desired group or track.

	DISC	folder name 1
	MENU	folder name 1
	MENU	folder name 2
		folder name 3
		folder name 4
		file name 1
		file name 2
		file name 3
		folder name 1

•If a group is selected, press [B] or [ENTER] to go on to the track selection screen. Press [s] to go back to previous screen.(except for the top page.)

•If a track is selected, press [ENTER] to start playing tracks. Starting from the one you’ve just chosen the subsequent tracks will be played.

•If the entire file list cannot be displayed at once on a screen, “n” appears to go to the next page.

•Press [TITLE] to return to the top file of the highest hierarchy in the program and file list.

2 Press [STOP C] to stop playback.

STOP

NOTE

•Folders are known as Groups; files are known as Tracks.

•MP3 files are accompanied by 3 icon.

•Maximum of 255 folders can be recognized.

•Maximum of 999 files can be recognized.

•Up to 8 hierarchies can be created.

This unit recommends the use of files recorded at the below specifications:

•Sampling frequency: 44.1kHz or 48kHz

•Constant bit rate: 32kbps ~ 320kbps

•For MP3 file recorded in Variable Bit Rate (VBR), the unit may not display the actual elapsed time.

– 18 –