Sylvania SRTD420 owner manual Special Playback Function, Repeat, Random Playback, Program

SPECIAL PLAYBACK FUNCTION

REPEAT PROGRAM

REPEAT is available only during playback.

REPEAT TITLE / CHAPTER

DVD-V

To activate the repeat function, press REPEAT during playback.

¡The repeat mode changes as described below every time you press the button.

CHAPTER	TITLE	OFF
(current chapter repeat)	(current title repeat)	(repeat off)
NOTES

CD

You may determine the order in which tracks will play.

1In stop mode, press MODE.

¡The PROGRAM screen will appear.

2Press Arrow (▲/▼) to select a track, then

press ENTER.
¡Press CLEAR to erase the	TOTAL
most recently entered pro-
gram.

¡Repeat Title/Chapter is not available with some scenes.

¡The REPEAT setting will be cleared when moving to other title or chapter.

REPEAT TRACK

CD

To activate the repeat function, press REPEAT during playback.

¡The repeat mode changes as described below every time you press the button.

TRACK	ALL	OFF
(current track repeat)	(entire disc repeat)	(repeat off)
NOTES

¡Repeat setting will be cleared when moving to other track.

¡Repeat playback does not function during repeat A- B playback.

REPEAT A-B

DVD-V CD

1Press REPEAT A-B at your chosen starting

point.

¡ A- appears briefly on the TV screen.

2Press REPEAT A-B again at your chosen

end point.

¡ A-B appears briefly on the TV screen, and the repeat sequence begins.

3To exit the sequence, press REPEAT A-B.

3Repeat step 2 until you have selected all the tracks you want to play in the program.

4Press PLAY to play the programmed tracks.

NOTES

¡While the program is being played back, the STOP works as follows.

¡Press STOP once and then PLAY again, playback will restart from the point where STOP was pressed. (Program continued)

¡Press STOP twice and then PLAY again, playback will restart from the track in the usual way. (Program cleared)

¡Up to 99 programs can be entered.

¡To erase all programs at once, select ALL CLEAR at the bottom of the list at Step2.

¡If you like to repeat the current track in the program,

press REPEAT repeatedly until TRACK appears

during playback. If you like to repeat the entire pro-

gram press REPEAT repeatedly until ALL appears during playback.

RANDOM PLAYBACK

CD

This shuffles the playing order of tracks instead of playback in sequence as recorded on the disc.

1In stop mode, press MODE twice.

¡RANDOM screen appears.

RANDOM

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

- - no indication - -

PLAY

NOTES

¡The repeat A-B section can only be set within the cur- rent title (for DVDs), or current track (for audio CDs).

¡Repeat A-B is not available with some scenes in DVD. ¡To cancel the A point which was set, press CLEAR. ¡Repeat A-B playback does not function during title,

chapter, track or all repeat playback.

2Press PLAY to start random playback.

NOTE

¡If you like to repeat the current track in the random selection, press REPEAT repeatedly until TRACK appears during playback. If you like to

repeat the entire random selection press REPEAT

repeatedly until ALL appears during playback.

– 23 – EN

0C28