Sylvania ZV450SL8 owner manual Remote Control, Open the cover Insert batteries, Close the cover

Page 12

FUNCTIONAL OVERVIEW

Remote Control

Installing the Batteries in the Remote Control

Install the batteries (AAx2) matching the polarity indicated inside battery compartment of the remote control.

1Open the cover.

2Insert batteries.

Using a Remote Control

Keep in mind the following when using the remote control:

Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.

Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit.

Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit.

Replace the batteries when you notice a fall off in the operating range of the remote control.

The maximum operable ranges from the unit are as follows.

-Line of sight: approx. 23 feet (7m)

-Either side of the center: approx. 16 feet (5m) within 30°

-Above: approx. 16 feet (5m) within 15°

-Below: approx. 10 feet (3m) within 30°

Make sure to match + and - on the batteries to

16 feet (5m)

 

16 feet (5m)

the marks indicated in the battery compartment.

30˚

23 feet (7m)

30˚

3Close the cover.

Caution:

Never throw batteries into a fire.

Note:

Be sure to use AA size batteries.

Dispose of batteries in a designated disposal area.

Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.

If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.

When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination.

Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.

1

2

3

4

5

6

7

8

9

10

11

12

1413

15

16

POWER

INPUT

DTV / TV

OPEN/CLOSE

 

SELECT

 

.@/:

ABC

DEF

 

1

2

3

 

GHI

JKL

MNO

CH

4

5

6

 

PQRS

TUV

WXYZ

DISPLAY

7

8

9

 

 

SPACE

CLEAR

SETUP

 

0

 

 

TOP MENU MENU/LIST

RETURN

ENTER

 

VCR

DVD

 

AUDIO

 

PLAY

 

REC SPEED

SKIP

PAUSE

SKIP

TIMER PROG. CM SKIP

STOP

X1.3/0.8

REC/OTR DUBBING T-SET SEARCH

DVD RECORDER / VCR

NB666

17

18

1920

22

23

24

25

2627

2829

3031

33

12 EN

Image 12
Contents ZV450SL8 Precautions Laser SafetyMake your contribution to the environment RADIO-TV InterferencePrecautions IntroductionInstallation Location Supplied AccessoriesAvoid the Hazards of Electrical Shock and Fire Moisture Condensation WarningMaintenance Servicing Cleaning the cabinetCleaning discs Cleaning the disc lensContents Features Features DVD-RUnplayable Discs Color SystemsRegion Codes Logo Icon Files for playing backFunctional Overview Front Panel21 2019 18 17 13 12 11 10 Functional Overview Rear Panel11 10 Remote Control Installing the Batteries in the Remote ControlUsing a Remote Control Open the cover Insert batteriesDTV/TV button DVD/VCR Front Panel Display Display MessageDB HDD Current status of the unitDisconnect the power cord of your TV from the AC outlet Antenna Cable ConnectionPlug in the power cords of the devices to the AC outlet RF Modulator ConnectionSupplied cables used in this connection are as follows With this setup IntroductionConnection to a TV This unitVideo OUT Audio OUT DVD Video OUT Component Video OutputSetting Connection to AN Audio SystemAudio Audio OUTThevcr / DVD Recorder Switching VCR modeSetup VCR Functions Others Español On-Screen Display / MenuOFF File Name InformationDVD mode Disc Information / Menu Guide to ON-SCREEN Displays and MenusConnections Basic Setup Main MenuDisc Management Recording Playback Initial Setting Press PowerPress Enter to activate Clock AirChannel Setting Use K / L to select Auto Preset, then press EnterWhen scanning is over, press Setup to exit Auto Channel ScanChannel Setting Use K / L to select Manual Preset, then press EnterAdding / Deleting Channels Press Setup to exit DeleteSetting the Clock Auto Clock SettingUse K / L to select Auto Clock Setting, then press Enter Press Setup to exit and turn off the unitSetting the Clock Manual Clock SettingDaylight Saving Time Tuner Settings Switching Analog Mode Digital ModeChannel Selection Tuner Settings Function Editing Setup VCR Functions Others EspañolSelecting TV Audio Press Audio to cycle through available audio languagesSelecting TV Audio cont’d Use K / L to select TV Audio Select, then press EnterSAP, then press Enter Use K / L to select Stereo orDTV Closed Caption Use K / L to select Display, then press EnterUse K / L to select CC Style, then Use K / L to select DTV CC, thenClosed Caption Style Then press EnterSwitch the setting for each item you Use K / L to select the itemWant to set, then press Enter Formatting a Disc Choosing the Recording Format of a Brand-New DVD-RWFormatting is completed.100% is indicated Insert a brand-new disc. Formatting will startFormatting a Disc Reformatting a Disc ManuallyUse K / L to select Format, then press Enter Use K / L to select Yes, then press EnterSetting for Auto Chapter Setting Aspect Ratio for Video Mode RecordingPress Setup to exit Preparing a DiscSetting a Disc to Protect OFF ON, then press ENTER. e.g. VR mode DVD-RWTo cancel the disc protect Disc will be protectedGeneral Setting menu will appear Auto FinalizingPress Setup Use K / L to select DVD Menu, then press Enter Playing the Discs in Other DVD PlayersFinalizing a Disc Use K / L to select Finalize, then press Enter42 EN Information on DVD Recording Recording SpeedRestrictions on Recording VideoPress OPEN/CLOSE a to close the disc tray Press REC Speed to select a recording speedNumber buttons to select a desired Channel to record It may take awhile to load Disc completelyDisc Connections Basic Setup Management Recording Press Stop C to stop recordingPress REC/OTR to start recording Playback EditingTimer Recording Use K / L to enter the date, then press BTimer Recording To stop the timer recording in process Press T-SETWill disappear on the front panel display Hints for Timer Recording Priority of Overlapped SettingsVCR Functions Others Español Settings for AN External Device Connection to an External DeviceExternal device If you want to use S-VIDEO in jack, select VideoSettings for AN External Device Recording from an External DevicePress Stop C / Stop C/EJECT a on the unit to stop recording It takes a while to load DiscDubbing Mode Use K / L to select Dubbing Mode, then press EnterUse K / L to select Recording, then press Enter Make sure that the disc is recordable. Refer toDubbing Mode Press DVDPress Dubbing Press Stop C to stop the recordingStructure of Disc Contents Information on PlaybackDirect Playback Some discs may start playback automaticallyBasic Playback Playback from the Title ListPress Stop C once to stop playback Use K / L to select Play FromFollow steps 1 to 2 in Direct Playback onOr track/file, then press Enter Press OPEN/CLOSE a to closeUsing the Title / Disc Menu PauseKodak Picture CD Special Playback Resume PlaybackFast Forward / Fast Reverse Playback Skipping TV Commercials During PlaybackSpecial Playback Rapid PlaybackStep by Step Playback Slow Forward / Slow Reverse PlaybackMarker Setting ZoomDVD-video Using Skip j / Skip Using DisplaySearch Title/Chapter SearchSearch Time SearchAudio CD Repeat Playback Random PlaybackEnter Program Playback Slide Show5Press Play B Switching Subtitles Switching Audio SoundtrackSwitching Virtual Surround System Switching Camera AnglesReducing Block Noise Information on Disc Editing Guide to a Title ListDeleting Titles After the disc is fully recordedDisc Management Recording Deleting Titles Press DVD firstUse K / L/ s / B to select a desired Title, then press EnterCREATING/DELETING Playlist Adding Titles to a PlaylistUse K / L to select Add To Playlist, then press EnterPress DVD first. Press Setup CREATING/DELETING PlaylistErasing All Playlist Use K / L to select Yes, then press ENTER.DVD MenuEditing Discs Putting Names on TitlesMode automatically Previous input mode automaticallyEditing Discs Putting Names on Titles cont’dSetting or Clearing Chapter Marks Disc Connections Basic Setup Management Recording PlaybackUse Skip H / G Press ReturnVR mode DVD-RW playlist Deleting a Part of a TitleUse K / L to select Scene Delete, then press Enter Cursor will move to PreviewUse K / L to select Delete then press Enter Then press EnterPart of the title is deleted Dividing a Title Press DVD first Stop mode, press TOP MenuPress Return or Stop C to exit Combining Titles Combining, then press EnterOthers Setting or Releasing the Title Protection To protect a whole disc VR mode DVD-RW onlyConfirm the indication OFF ON. Press Enter again Press Return and then Return or Stop C to exitSetting or Clearing All Chapter Marks at Once Use K / L to select Chapter MarkUse K / L to select the desired interval, then press Enter If you select OFF at , all the chapter marks are erasedList of Settings ContentsList of Settings EspañolSetups PlaybackUse K / L to select a desired item, then press Enter Press Stop C if you are playing back a discSetups Parental Lock Default AllPlayback cont’d FunctionDisc Menu Language Default English Audio Language Default OriginalAudio Out PCMSubtitle Language Default OFF Angle Icon Default onStill Mode Default Auto When you finish with setting, press Setup to exit DisplayRefer to 1 to 5 on page 89 and set the selected item ForOSD Language Default English Screen Saver Default 10 minutesFL Dimmer Default Bright Display cont’dVideo Selected itemRefer 1 to 2 on page 91 and set For 3 , refer to Connection to an ExternalProgressive Default OFF TV Aspect Default 43 Letter BoxVideo cont’d Reset All Select Yes using K / L , then press EnterSelect Yes again using K / L , then press Enter Reset the setting to defaultVCR Functions Press VCR first Before recording, make sureRecording speed Press REC/OTR to begin the recordingOne-touch Timer Recording OTR You cannot pause the one-touch timer recordingUsing REC/OTR or Stop C VCR FunctionsOther Operations Troubleshooting SymptomRemedy SETTroubleshooting Symptom RemedyPress OPEN/CLOSE a OPEN/CLOSE a to take out the disc. The disc canceled during Repairing process MAY not workREC/OTR Error message Cause Solution Frequently Asked Questions Language Code Language CodeGlossary Specifications GeneralRecording TunerEspañol Discos no ReproduciblesCódigos de Región Disco simple de video VSDEspañol Introduction ConnectionsPresione Power Presione Enter para activar Ajste Manual de RelojPresione DVD Con el rótulo aupntando hacia arribaPresione Timer Prog Configure una programación delTemporizador Presione EnterCustomer Service TelE9H10UD 1VMN23497Plug in the power cords of the devices to the AC outlet Make the basic connection as illustrated belowMake the connection as illustrated below DVD-VIDEO CD-DA CD-RW6Press Stop C to stop recording Open the disc tray Start playing back3Press REC Speed to select a recording speed 5Press REC/OTR to start recording
Related manuals
Manual 1 pages 36.12 Kb