Sylvania 6615LDF manual TV Operation and Settings, Watching a TV Program, To Watch External Input

TV SECTION

TV OPERATION AND SETTINGS

POWER PICTURE SELECT EJECT

1	2	3
			CH.
4	5	6
7	8	9
SLEEP		+100	VOL.
	0	+10
SKIP		ZOOM	MUTE
REV		PLAY	FWD
		STOP
PAUSE	SLOW		DISC
			MENU

DISPLAY

ENTER

NOTE

For channel number selection with number buttons:

•To select single-digit channel number, press

[0]first. (e.g. Press [0] [2] for channel 2.)

•To select cable channels which are higher than 99, press [+100/+10] first.

(e.g. Press [+100/+10] [2] [5] for channel 125.)

4 Press [VOL. X / Y] to select the desired vol- ume level.

VOL.

VOLUME 20

C C C C C C C C C C C C C C C C

•Press [MUTE] to instantly mute the sound. Press it again to restore the previous volume level.

SETUP TITLE RETURN

•Shaded buttons are used for following operation.

WATCHING A TV PROGRAM

1 Plug the power cord into a standard AC outlet.

NOTE

•If any digits are displayed in the corner of the screen, press [POWER] without unplugging the power cord.

NOTE

•If you press [CH. K / L] in the DVD mode, you can change the TV channels. Even if you turn off the unit in the DVD mode, when you turn it on again, it will go into the TV mode.

TO WATCH CABLE OR SATELLITE CHANNEL

If the unit is connected to a cable box or satellite box, press [CH. K / L] to select CH3 or CH4 according to the output channel setting of the device and select desired channel on that device.

2 Press [POWER] to turn on the unit.

POWER

3 Press [CH. K / L] to select the desired chan- nel number.

CH.

OR

Press the Number buttons to enter the desired channel number.

1	2	3
4	5	6
7	8	9
		+100
	0	+10

TO WATCH EXTERNAL INPUT

When an external equipment is connected to the front AUDIO/VIDEO input jacks, press [SELECT] or [CH. K / L] repeatedly until “VIDEO1” or “VIDEO2” appears on the screen.

NOTE

•If a disc is inside the unit, “DISC INSIDE” mes- sage is displayed on the screen for 10 seconds.

DISC INSIDE

•To clear the message instantly, press [CLEAR].

- 12 - EN