Sylvania 6615LDF manual Set, Dvd

G PARENTAL CONTROL

Parental Control limits the disc viewing that exceed your setting (with a password or playback will stop). This feature allows you to prevent discs with alterna- tive scenes from being played by your children.

PARENTAL LEVEL

Parental Level allows you to set the rating level of your DVD discs. Playback will stop if the disc’s rat- ings exceed the level you set.

Follow steps 1 to 2 in the	CUSTOM MENU on
page 29.
3 Enter your four-digit password then press
[ENTER].
SETUP PARENTAL	1	2	3
PASSWORD	4	5	6
Enter current password.	7	8	9	ENTER
		0

•Press [4], [7], [3], [7] then enter your password if you forget the password.

4 Press [K] or [L] to select “PARENTAL LEVEL” then press [ENTER].

SETUP	PARENTAL
PARENTAL LEVEL		ALL	ENTER
PASSWORD CHANGE

5 Press [K] or [L] to select the desired level then press [ENTER].

SETUP	PARENTAL
PARENTAL LEVEL
ALL	ENTER
8

7[NC-17]

6[R]

6 Press [SETUP] to exit the menu.

SETUP

NOTE

•When doing this for the first time, enter any 4 digits. (except for 4737) That number will be used as the password. (in the event you forget the password, see below)

•To change the password, press [K] or [L] to select “PASSWORD CHANGE” at step 4 then press [ENTER]. Enter the four-digit password, then press [ENTER].

•With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

•Record the password in case you forget it.

CONTROL LEVELS

•ALL

All parental lock is cancelled.

•Level 8

DVD software of any grade (adult/general/children) can be played back.

•Levels 7 to 2

Only DVD software intended for general use and children can be played back.

•Level 1

Only DVD software intended for children can be played back, with those intended for adult and gen- eral use prohibited.

H OTHER SETTINGS

Follow steps 1 to 2 in the			CUSTOM MENU				on
page 29.
3 Press [K] or [L] to select the below items then
press [ENTER].
		SETUP		OTHERS
					ON
		ANGLE ICON				ENTER
		SCREEN SAVER			OFF
ANGLE ICON:
• Press [ENTER] repeatedly to turn Angle icon
“ON” or “OFF”.								ITEMS
• The default setting is “ON”.
SCREEN SAVER:
• Press [ENTER] repeatedly to turn Screen Saver								UP
“ON” or “OFF”.
• The default setting is “OFF”. If you select “ON”,								SET
the screen saver program starts when there is no
input from the unit for 5 minutes in stop mode.								DVD
4 Press [SETUP] to exit the menu.
								THEHANGINGC
	SETUP
								DVD SECTION

– 31 – EN