Initial Setup
How to set the channel label. (This is only for analog broadcasting.)
Press the MENU button
π† To CHANNEL SUMMARY √® To operate
π† To the ID column
Press the OK button to enter
√® To select the character you want π† To move to the next space
ID
CHANNEL 09
RESET
PRESS OK TO FINISH
SELECT OPERATE | MENU EXIT |
...continue to follow these directions for all four spaces
Press the OK button to finish
Your characters are now set
Press the MENU button when finished
If you want to reset the characters you set:
Press the MENU button
π† To CHANNEL SUMMARY √® To operate
π† To the ID column
Press the OK button to enter π† To select RESET
Press the OK button to finish
Your characters are now reset
Notes:
•You can use characters for: Alphabet, numbers, marks and spaces.
•It is possible to set the maximum of 40 channel labels.
•If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will appear.
You can block access to a channel by activating the channel lock.
Press the MENU button
π† To CHANNEL SUMMARY
è To operate
π†√® To the Lock Column ( 
)
Press the ZERO button to lock or unlock that channel Press the MENU button when finished
31