JVC AV-20N3/D, AV-20NMG3/-A Static Convergence Adjustment, Dynamic Convergence Adjustment

AV-20N3 AV-20NMG3 AV-20NMG3B

STATIC CONVERGENCE ADJUSTMENT

1.Input a crosshatch signal.

2.Using 4-pole convergence magnets, overlap the red and blue lines in the center of the screen (Fig.1) and turn them to magenta (red/blue).

3.Using 6-pole convergence magnets, overlap the magenta(red/blue) and green lines in the center of the screen and turn them to white.

4.Repeat 2 and 3 above, and make best convergence.

DYNAMIC CONVERGENCE ADJUSTMENT

1.Move the deflection yoke up and down and overlap the lines in the periphery. (Fig. 2)

2.Move the deflection yoke left to right and overlap the lines in the periphery. (Fig. 3)

3.Repeat 1 and 2 above, and make best convergence.

●After adjustment, fix the wedge at the original position. Fasten the retainer screw of the deflection yoke.

Fix the 6 magnets with glue.

(FRONT VIEW )

Fig.1

(FRONT VIEW )

RED GREEN BLUE

BLUE	RED
GREEN	GREEN
RED	BLUE

BLUE GREEN RED

Fig.2

(FRONT VIEW )

GREEN		GREEN
RED	BLUE	BLUE	RED
			RED
			GREEN
			BLUE
			BLUE
			GREEN
			RED
		Fig.3

30 No.52025