JVC AV-21FT1SUG, AV-21FT1BUG, AV-29FT1SUG, AV-29FT1BUG manual Connecting External Equipment

Page 12

CONNECTING EXTERNAL EQUIPMENT

The rear Scart EXT-1, Scart EXT-2 sockets, the front EXT -3 socket are three dedicated sockets to connect audio-video equipment.

AV

TV/AV SELECTION

Allows to switch between TV and external modes. By repeatedly pressing the remote control AV (A15) or the

 

TV front panel TV /AV button (B8), the on-screen display is changed as shown :

EXT-1 > EXT-2 > EXT-2 S > EXT-3 > EXT-3 S > TV (AV-29FT1 model)

EXT-1 > EXT-2 > EXT-2 S > EXT-3 > TV (AV-21FT1 model)

Remark: If the signal source from the rear SCART socket (EXT-1) is RGB (e.g.normally from a DVD player)

R e a r

VCR / DVD / Video Game / Pay-TV decoder

Important: If your video equipment does not have SCART socket(s), or if you wish to use only the aerial (RF) connection (not recommended), then you should make use of program number 00 on the TV set for best performance.

AERIAL socket

ANT

 

 

 

EXT-1

EXT- 2

( S )

ENGLISH

REAR SCART SOCKET (EXT-1)

This socket has video / audio inputs and outputs. It is recommended to connect to this socket automatic AV switching equipment such as pay-TV decoders, video games, DVD players and most VCR's.

In most cases, when connecting powered equipment to this socket, the TV set switches automatically to AV mode. If not, then use the AV buttons (A15 or B8) to select EXT-1.

REAR SCART SOCKET (EXT-2)

This socket has video / audio inputs and outputs. Automatic AV switching equipment (for example most VCR's) can be connected to this socket. In most cases, when connecting powered equipment to this socket, the TV set switches automatically to AV mode. If not, then use the AV buttons (A15 or B8) to select EXT-2.

You can also receive an S-VHSsignal by selecting EXT-2 S with the AV buttons (A15 or B8).

Front

FRONT AV SOCKET (EXT-3)

The front AV socket has audio and video inputs. Without the video input connection, audio output is not available. To switch from TV to these inputs, use the AV buttons (A15 or B8) and select EXT-3.

Note (ONLY FOR AV-29FT1 MODEL): Do not connect the cables to front video input and S-video input at the same time. If do so, picture will not be displayed properly.

$9)702'(/

 

$9)702'(/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FRONT S-VHS JACK

The front S-VHS jack (B2) has video inputs only. It is necessary to connect the audio inputs to socket (B4) in order to have audio and video. To watch TV from these inputs, use the AV buttons (A15 or B8) and select EXT-3 S.

CAMCORDER

OR

VIDEO GAME

HEADPHONE SOCKET

To hear TV sound with headphones, insert a 3.5mm headphone plug into the headphone socket. The speaker's sound will be automatically cut off.

12

Image 12
Contents AV-21FT1BUG AV-29FT1SUG AV-29FT1BUG Object Entry Identity of Local & Remote Control Remote ControlLocal Control Installation Auto Tuning SystemPL, S Others EnglishManual Channel Tuning FranceEuro Switching on and OFF TV SET Daily USEProgram Selection from 0 to Sound Control SpatialOFF Sound MenuBBC1 Program Status Display InformationSleep Function Format SelectionFeatures Menu Language SelectionENTERING/LEAVING Teletext Mode SelectionUseful Teletext Functions VOLUME, Brightness Control Watching TV While page SearchingWatching TV with Teletext Subtitles English MenuConnecting External Equipment VCR / DVD / Video Game / Pay-TV decoderTroubleshooting Following are normal and are not malfunctionsAV-21FT1SUG / AV-21FT1BUG AV-29FT1SUG / AV-29FT1BUG HSI L GNE