JVC specifications Connecting the aerial and VCR

Preparation

2Connecting the aerial and VCR

•Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method.

•Turn off all the devices including the TV.

•Connecting cables are not supplied.

•When connecting monaural audio to the TV, use the L/MONO jack.

•You can connect an S-VIDEO compatible device (such as an S-VHS VCR) to the S-connector with an S-VIDEO cable and enjoy the high quality picture of the S-VIDEO signal (Y/C signal). In that case, do not connect it to the TV with a video cable.

•If you connect the VCR to the TV only with an aerial cable, you should preset the video channel from the VCR to the AV channel (channel number 0) on this TV. See “MANUAL CH PRESET” on page 20 and preset it manually.

Connecting the aerial

VIDEO-1	COMPONENT
	(VIDEO-2)	OUTPUT
INPUT
	INPUT
S

VHF/UHF outdoor aerial

OVER

V

Y/V

V

L/ MONO	CB	L/ MONO L
R	CR	R	R

Connecting the aerial and VCR

VHF/UHF outdoor aerial

	VIDEO-1	COMPONENT
			(VIDEO-2)	OUTPUT
	INPUT
			INPUT
	S
	OVER
	V	Y/V		V
3	L/ MONO	CB	L/ MONO L
	R	CR	R	R

To video		To audio	To RF
output		output	output
To S-video
output	VCR	To aerial input 1

2

3