Using the Decoder EXT-2 function | JVC AV-28ED5SN, AV-28ED5BN

in turn is connected to the EXT.2 terminal. To use this item, please see the

“Using the Decoder (EXT-2) function” on the following sec- tion.

Store:

After the all settings are completed, store the new channel’s setting to the programme number which you selected.

•Press ““ or “” button to select “Store”, then press “” or “” to store it.

Using the Decoder (EXT-2) function

If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT.2 terminal, use DECODER (EXT-2) to unscramble the scrambled TV chan- nels.

1.Exit the menu.

2.Turn on the decoder power.

3.Display the scrambled TV channel on the TV. Even if the decoder is working, a scrambled picture appears.

4.Display the “INSTALL.” menu again.

5.Press “” or “” button to select DECODER (EXT-2), then press “” or “” button to set to “ON”

6.Press “ ” or “ ” to select STORE, then press “” or “” button to store it. “T-V LINK” menu will appear after the TV stores the setting.

7.Follow the operating procedure “Downloading the data to VCR” on page 21 to transmit the revised programme table data to the VCR.

•If you do not want to transmit, press “PICTURE” button to exit the menu.

Note:

You can only use this item if you have a decoder connected to a T-V LINK compatible VCR to EXT.2 terminal. Setting this item to “ON” by mistake causes the picture/sound of a TV channel you are currently viewing to disappear.

If this item has been set to “ON” but the TV channel cannot be unscrambled, check the following:

•Has the decoder been connected to the VCR properly ac- cording to the VCR and Decoder instruction manuals?

•Can the TV channel be unscrambled with a decoder?

•Do you need to change the VCR settings in order to con- nect the decoder? Confirm that the VCR is set properly by rechecking the VCR instruction manual.

Program Menu:

You can use the PROGRAM menu to change a programme number, delete a channel.

•Press ““ or “ ” button to select “PROGRAM” item.

•Press “” or “352*5” button$0to enter the PROGRAM menu.

L79FKDQJHGHOHWH/LQN

To choose a channel in the PROGRAM menu:

Press ““ / “ ”/ “” / “” button.

The colour of the programme number that you choose is changed in the PROGRAM menu and you can view the pic- ture of that channel.

Caution:

Using “DELETE” or “CHANGE” item rewrite the current chan- nel list in the PROGRAM menu. Therefore, the programme numbers of some of channels will change.

When you complete the settings of PROGRAM menu:

If you have a T-V LINK compatible VCR, press the “” but-

ton to display the T-V LINK menu. Then follow the operating procedure “Downloading the data to VCR” on page 21 to transmit the Programme table data to the VCR.

If you do not have a T-V LINK compatible VCR, press “PIC- TURE” button to exit the menu.