JVC AV-28ED5BN, AV-28ED5SN manual Sound Menu, Recalling Factory settings, To change sound settings

Note: When Picture Mode is not “USER”, BRIGHTNESS, CONTRAST and COLOUR options can not be operated “” or “” button.

Factory Settings:

When Picture Mode is selected User if you press the YEL- LOW button the adjustmens switches themselves to the fac- tory settings.

You can change the values of this items firstly by selecting

the item by “ “ or “ ” button and then by using “” or “” button. The PICTURE menu disappears and level indica- tors are displayed while items are changed. The PICTURE menu is restored after adjustment is finished.

This item is used to change the picture mode. By pressing “” or “” button you may choose one of these options:

Bright, Standard3,&785(, Soft6KDUSQHVV&R%ULJKWQHVV3LFWXUH, QWUDVWORXUUser￿0RGH.

You can change Brightness only when Picture Mode is se- lected User.

•You can change the Brightness by “” or “” button after selecting this item.

You can change Contrast only when Picture Mode is select- ed User.

•You can change the Contrast by “” or “” button after se- lecting this item.

You can change Colour only when Picture Mode is selected User.

•You can change the Colour by “” or “” button after select- ing this item.

•You can change the Sharpness by “” or “” button after selecting this item.

•You can adjust the Colour Temp item as Normal, Warm

and Cool. Using “” or “” button toggle between these three settings.

3,&785(&RORXU=RRP1LVH6KDUSQVV￿UHGXFWLRQ￿7HPS

•The Noise reduction can be adjusted in four different lev- els: Minumum, Medium, Maximum and Auto. Addition- ally it can be cancelled by selecting the OFF option. Press- ing “” or “” button toggles between these five settings.

•The Zoom can be three different modes: Auto, 4:3 or 16:9

modes. Using “” or “” button toggle between these differ- ent screen formats.

The Picture Mode can be stored for all channels (200 chan- nels) individually.

It is also possible to change picture modes directly by press- ing “ZOOM” button (RED button) on your remote control.

•You can change the Hue for NTSC 3.58/4.43 systems by

“” or “” button after selecting this item. A level indicator for Hue is displayed while changing this item. The Hue bar is displayed while an NTSC signal is input from the EXT-1, EXT-2, or EXT-3 (Front AV) terminal.

Recalling Factory settings.:

You can re-set the current PICTURE menu settings (except Noise Reduction and Colour Temp settings) to the default settings.

• Press “PICTURE” button when no menu appears.

Sound Menu

To change sound settings:

•Press “MENU” button, now you are in main menu. In the

main menu, select SOUND using ““ or “” button, then enter the sound menu pressing “” or “” button.

Setting Volume:

Using ““ or “” button to select Volume.

•Press “” button to increase volume.

•Press “” button to decrease volume.

ENGLISH - 23 -