JVC AV-16N214, AV-21Y214, AV-21L314, AV-17V214 AV-29J334/AV-29V334/AV-25V334/AV-21V334 only

Additional preparation (continued)

Attaching the Twin Port Bass Blaster Unit

<AV-29J334/AV-29V334/AV-25V334/AV-21V334 only>

The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV, mount the Twin Port Bass Blaster unit correctly on the TV.

•The SUPER BASS (BASS) function do not work unless the Twin Port Bass Blaster Unit is connected correctly to the TV. For details on the SUPER BASS (BASS) function, see page 12.

1Place the unit on top of the TV making sure that the mounting pin on the bottom of the unit fits into the mounting hole on the top of the TV.

•When you mount the unit, make sure that the mounting pin fits properly into the mounting hole. Otherwise, it may slide off the top of the TV. This may cause damage or cause unexpected injury.

Twin Port

Bass Blaster

Unit

CAUTION:

The Twin Port Bass Blaster Unit is just placed on top of the TV and is not held in place by a screw. When using the unit, pay attention to the following cautions. Otherwise, the unit or TV may fall over and be damaged, or cause unexpected injury.

•Do not rest your hands or elbows on the Twin Port Bass Blaster Unit.

•Do not move the TV with the Twin Port Blaster Unit mounted on top of the TV. Before you move the TV, be sure to remove the unit.

•Do not move the TV by holding the Twin Port Bass Blaster Unit.

2Firmly insert the Twin Port Bass Blaster Unit connector into the BASS SPEAKER OUT terminal.

VIDEO -1	COMPONENT
		(VIDEO-2)	OUTPUT
INPUT
		INPUT
S
OVER
V	Y /V		V
BASS
SPEAKER
OUT L / MONO	C B	L / MONO L

R

C R R R

21