JVC AV-32S565 manual Center CH Input, Audio Out, TV Speaker

Initial Setup

Center CH Input

When you are using a surround system, you can substitute the speaker of this television for the center speaker of your surround system. Set CENTER CH INPUT to on when you use the speaker as the center speaker of your surround system.

Press the MENU button

π† To CENTER CH INPUT

√® To adjust CENTER CH INPUT to “ON” or “OFF”

Press the MENU button when finished

Note:

The normal speaker output is 20W 16Ω. The maximum is 40W. If you exceed the maximum, your speaker may break.

INITIAL SETUP

PREVIOUS

DIGITAL-IN	SIZE1
DIGITAL-IN AUDIO	DIGITAL
CENTER CH INPUT	ON
AUDIO OUT	VARI
TV SPEAKER	ON
NEXT PAGE	(1/4)
SELECT OPERATE	MENU EXIT

Audio Out

If your television is connected to an external speaker source, audio out gives you the option of controlling the volume level with your TV’s remote control.

Press the MENU button

π† To AUDIO OUT √® To VARI or FIX

Press the MENU button when finished

VARI: Lets you adjust the volume of the external speakers using the VOLUME+/– buttons on your TV’s remote control.

FIX: The volume of the external speakers is adjusted using the audio device’s remote control.

INITIAL SETUP

PREVIOUS

DIGITAL-IN	SIZE1
DIGITAL-IN AUDIO	DIGITAL
CENTER CH INPUT	ON
AUDIO OUT	VARI
TV SPEAKER	ON
NEXT PAGE	(1/4)
SELECT OPERATE	MENU EXIT

TV Speaker

If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio through your stereo.

	Press the MENU button	INITIAL SETUP
π†	To TV SPEAKER	PREVIOUS
		DIGITAL-IN	SIZE1
√®	To turn the TV’s speakers ON or OFF
		DIGITAL-IN AUDIO	DIGITAL
	Press the MENU button when finished	CENTER CH INPUT	ON
		AUDIO OUT	VARI
		TV SPEAKER	ON
Notes:		NEXT PAGE	(1/4)
		SELECT OPERATE	MENU EXIT

•Before you turn the TV speaker setting from OFF

to ON, make sure that the TV volume level is low! If the TV volume is set too high, the sound level will be extremely loud.

•After a power interruption, the TV speaker settings will return to “ON”.

44