ON/OFF TIMER
ON TIMER SETTING
This feature allows you to have the TV automatically turn "ON" at predetermined time.
If you program the "ON" timer once the timer will turn "ON" the TV daily at the same time and to the same channel. If the power has been turned on at programmed time, the channel is changed to a programmed one.
TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS | POSSIBLE SOLUTIONS |
|
|
| • Make sure the power cord is plugged in. |
| • Try another AC outlet. |
C-T1421
1
2
3
4
Press the MENU button.
Press the SET + or – button until the indicator next to "ON/OFF TIMER" begins to flash, then press the ENTER button.
Press the SET + or – button until the indicator next to "ON TIMER" begins to flash, then press the ENTER button.
Press the SET + or – button to set the hour, then press the ENTER button. If you want to change the hour, press the RESET button.
M E N U
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
LANGUAGE / IDIOMA
COLOR AUTO
〈+ /
ON/OFF TIMER
ON TIMER
0:00 CH012
| CANCEL |
OFF TIMER |
|
0:00 | CANCEL |
〈+ /
ON/OFF TIMER
ON TIMER
0:00 CH012
CANCEL
OFF TIMER
0:00CANCEL
〈 + /
5
6
7
Press the SET + or – button to set the minute, then press the ENTER button.
•You can change in 10- minutes step by holding down the SET + or – button.
Press the SET + or – button to set the channel, then press the ENTER button.
•You can set the channel which is added in the CH SET UP option.
Press the SET + or – button to select the SET mode.
ON/OFF TIMER
ON TIMER
7:00 CH012
CANCEL
OFF TIMER
0:00CANCEL
〈+ /
ON/OFF TIMER
ON TIMER
7:30 CH012
CANCEL
OFF TIMER
0:00CANCEL
〈+ /
ON/OFF TIMER
ON TIMER
7:30 CH007
| CANCEL |
OFF TIMER | CANCEL |
0:00 |
〈 + /
TV does not operate | • Power is off, check fuse or circuit breaker. | |
| • Unplug unit for an hour, then plug it back in. | |
|
| |
Poor sound or No sound | • Station or CATV experiencing problems, tune to another station. | |
• Check sound adjustments (Volume and Muting). | ||
| • Check for sources of possible interference. | |
|
| |
| • Station or CATV experiencing problems, tune to another station. | |
Poor picture or No picture | • Make sure channels are set into memory. | |
• Check antenna or CATV connections, reorient antenna. | ||
| • Check for sources of possible interference. | |
| • Check picture control adjustments. | |
|
| |
| • Station or CATV experiencing problems, tune to another station. | |
Poor reception on some channels | • Make sure channels are set into memory. | |
| • Station signal is weak, reorient antenna to receive desired station. | |
| • Check for sources of possible interference. | |
|
| |
| • Station or CATV experiencing problems, tune to another station. | |
| • Make sure channels are set into memory. | |
Poor color or no color | • Check picture control adjustments. | |
• Check antenna or CATV connections, reorient antenna. | ||
| ||
| • Check for sources of possible interference. | |
| • Check the color system. | |
|
| |
| • Station or CATV experiencing problems, tune to another station. | |
Picture wobbles or drifts | • Make sure channels are set into memory. | |
• CATV company is scrambling signal. |
No.51843
8 Press the MENU button.
NOTES:
•You cannot set the ON/OFF TIMER when the clock is not set.
•This TV will automatically turn off approximately 1 hour later after the ON TIMER turns on the TV unless any buttons are pressed.
•To cancel the ON TIMER function:
To cancel ON TIMER in step 7 above press the SET + or – button to select the CANCEL mode.
OFF TIMER SETTING
This feature allows you to have the TV turn "OFF" automatically at a predetermined time.
If you program the OFF TIMER once, The TV will be automatically turned off at the same time daily.
| • Check antenna orientation. | |
|
| |
No CATV reception | • Check all CATV connections. | |
• Set TV/CATV menu option to the CATV mode. | ||
| • Station or CATV system problems, try another station. | |
|
| |
Horizontal or diagonal bars on screen | • Check antenna connections, reorient antenna. | |
• Check for sources of possible interference. | ||
| ||
|
| |
No reception above channel 13 | • Make sure TV/CATV menu option is in the appropriate mode. | |
• If using antenna, check UHF antenna connections. | ||
| ||
|
| |
| • Batteries are weak, dead or inserted incorrectly. |
1
2
3
Press the MENU button.
Press the SET + or – button until the indicator next to "ON/OFF TIMER" begins to flash, then press the ENTER button.
Press the SET + or – button until the indicator next to "OFF TIMER" begins to flash, then press the ENTER button.
M E N U
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
LANGUAGE / IDIOMA
COLOR AUTO
〈+ /
ON/OFF TIMER
ON TIMER
7:30 | CH012 |
| CANCEL |
OFF TIMER | CANCEL |
0:00 |
〈 + /
4
5
6
Press the SET + or – | ON/OFF TIMER | ||
button to set the hour, | ON TIMER | CH012 | |
then press the | 7:30 | ||
| CANCEL | ||
ENTER button. | OFF TIMER | CANCEL | |
If you want to change the | 0:00 | ||
|
| ||
hour, press the RESET | 〈 + / | ||
button. |
|
| |
Press the SET + or – | ON/OFF TIMER | ||
button to set the minute | ON TIMER |
| |
7:30 | CH012 | ||
then press the ENTER |
| CANCEL | |
OFF TIMER |
| ||
button. |
| ||
11:00 | CANCEL | ||
• You can change in 10- | 〈 + / | ||
minutes step by holding | |||
|
| ||
down the SET + or – button. |
| ||
| ON/OFF TIMER | ||
Press the SET + or – | ON TIMER |
| |
7:30 | CH012 | ||
button to select the SET |
| CANCEL | |
|
| ||
mode. | OFF TIMER | CANCEL | |
| 11:30 | ||
No Remote operation | • Remote is out of range, move closer to TV within (15 feet). | |
• Make sure Remote is aimed at sensor. | ||
| • Confirm there are no obstructions between the Remote and the TV. | |
| • Make sure the power cord is plugged in. | |
|
| |
| • No broadcast on station tuned. | |
TV shuts off | • Sleep Timer is set. | |
• ON/OFF TIMER is set. | ||
| ||
| • Power interrupted. | |
| • Approximately 1 hour has passed after the ON TIMER turns on and no button was | |
| pressed (See page 14). | |
|
| |
| • TV station experiencing problems or program tuned is not closed captioned. | |
Closed - Caption is not activated. | Try another channel. | |
• Check CATV connection or VHF/UHF antenna, reposition or rotate antenna. | ||
| ||
| • Press TV/CAP/TEXT button to turn on the closed caption decoder. | |
|
| |
Display is not shown in your language. | • Select proper language in the menu options. |
7
Press the MENU button.
〈 + /
NOTES:
•If station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
•To cancel the OFF TIMER function:
To cancel OFF TIMER, in step 7 above press the SET + or – button to select the CANCEL mode.
14
15
VP0106 H.K