TO MEMORIZE CHANNELS
TV BASIC OPERATION
C-T1421
This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the CATV setting.
AUTOMATIC CHANNEL MEMORY
1Press the MENU button.
2Press the SET + or – button until the indicator next to "CH SET UP" begins to flash, then press the ENTER button.
M E N U
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE 
LANGUAGE / IDIOMA
COLOR AUTO
〈 + /
1
2
Press the POWER button on the front panel to put the TV into standby mode. The STAND BY indicator will light.
Press the POWER button on the remote control to turn on the TV.
You can also turn on the TV by pressing the CHAN- NEL UP or DOWN button on the front panel or on the remote control when the TV is in standby mode.
QUICK VIEW button
Returns to the channel viewed just before the channel currently onscreen.
CH 012 | CH 007 |
TV/CATV SELECTION
1 | Press the MENU button. |
|
|
2 | Press the SET + or – button until the |
| indicator next to "CH SET UP" |
| begins to flash, then press the |
| ENTER button. |
M E N U
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
LANGUAGE / IDIOMA 
COLOR AUTO
〈+ /
3
4
Press the SET + or – button until the indicator next to "AUTO CH MEMORY" begins to flash, then press the ENTER button. The TV will begin memorizing all the channels available in your area.
Press the MENU button.
CH SET UP
TV
CATV
AUTO CH MEMORY 
ADD / DELETE
〈 + /
3 The VOLUME can be adjusted to a desired level by pressing the VOL (VOLUME) 
or 
button.
Adjust the volume level by pressing the VOL 
or 
button. The volume level will be indicated on the screen by green bar. As the volume level
VOLUME32
MUTING button |
|
The MUTING button instantly turns the | MUTING |
volume down completely when you |
|
press it. |
|
Press MUTING button and the volume level will instantly go to zero. To restore
the volume to its previous level, press MUTING button again.
3 | Press the SET + or – button until the |
| indicator next to "TV/CATV" begins |
| to flash. |
|
|
4 | Press the ENTER button to select |
| the TV or CATV mode. The arrow |
| indicates the selected mode. |
|
|
5 | Press the MENU button. |
CH SET UP
TV
CATV AUTO CH MEMORY
ADD / DELETE
〈 + /
TO ADD/DELETE CHANNELS
1Press the MENU button.
2Press the SET + or – button until the indicator next to "CH
M E N U
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
LANGUAGE / IDIOMA
COLOR AUTO
〈 + /
increases, so do the number of bar. If the volume decreases,
the number of green bar also decreases.
The sound level will be indicated on the TV screen by green bars and a number. As the sound level in- creases, so do the number of bars and the number on the screen. The same is true for decreasing the level.
4 Set the TV/CATV menu option to the appropriate |
10-key pad (0-9)
Press these buttons to select a channel. The channel number will appear on the upper right corner of the TV screen. If an invalid channel number is selected, the display will revert to the original channel.
TV Mode Direct Channel Selection
3
Press the SET + or – button until the indicator next to "ADD/DELETE" begins to flash, then press the
CH SET UP
TV
CATV
AUTO CH MEMORY 
ADD / DELETE
position. When shipped from the factory, this menu |
option is in the CATV setting. See "TO MEMORIZE |
When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two buttons. (For example, to select channel 2, press "0", then "2". If you
No.51843
NOTE: Contact your cable company to determine the type of cable system used in your area.
4
ENTER button.
Select the desired channels to be added or deleted using the
〈 + /
CHANNELS". |
TV | - | VHF/UHF channels |
CATV | - | CABLE TV channels |
|
|
|
press only "2", channel selection will be delayed for a few seconds). For channels 10 and above, press the 2 digits in order.
CATV Mode Direct Channel Selection
5Press the ENTER button to select ADD or DELETE. If an unmemorized channel was selected (step 4), the channel indication will be red. Press the CH + or – button if you wish to ADD the unmemorized channel. The channel indicator will change from red to green when a channel is added and the channel will be memorized. If a memorized channel was selected (step 4), the channel indication will be green.
Press the CH + or – button if you wish to DELETE the
channel from memory. The channel | ADD | CH 012 |
indicator will change from green to |
|
|
red when a channel is deleted. |
|
|
Repeat Steps 4 and 5 for each | 〈 + / | |
channel to be added or deleted. |
|
|
6Press the MENU button after adding or deleting all of the desired channels, to return to normal TV viewing.
5CH (CHANNEL) 
and 
buttons Press and release the CH
(CHANNEL) | or | button. | CH 012 |
The channel automatically stops at the next channel set into memory.
For proper operation, before selecting channels, they should be set into the TV's memory.
See "TO MEMORIZE CHANNELS".
When the TV/CATV menu option is in the CATV position, channels can be selected as follows:
CH.
CH.
CH.
Example, to select channel 36, press "36".
CH.
Example, to select channel 120, press "120".
NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes.
10 | 11 |