JVC AV32Z10EU manual Adjusting the volume balance with the Test Mode, Stopping the test signal

Page 23

DIGITAL SURROUND

DELAY TIME:

A delay can be applied to SURROUND (surround sound) and CENTRE (centre sound) depending on the arrangement of the speakers.

SelectDELAYTIMEDELAY TIME and press the 3 button to display the SURROUNDDELAY TIME0menu.15The DELAY TIME is changed in 1ms steps every time the 5 buttons are pressed.

D0048TVCE-ENNTREBACKOK

3Press the OK button to complete the

setting.

The menu disappears.

Note:

When a speaker system is not connected to the TV, set TV SPEAKER to L/C/R and SUBWOOFER to OFF. Otherwise the sound will not be emitted correctly.

When you do not want to emit sound from the TV speakers, set TV SPEAKER to OFF.

The CENTRE (centre sound) DELAY TIME cannot be adjusted when the TV SPEAKER is set to L/C/R.

Adjusting the volume balance with the TEST MODE

Use the test signal to adjust the volume level of each speaker so that they are all the same.

Preparation:

The TV volume cannot be adjusted after the menu is displayed. Increase to the TV volume level to about 10 before displaying the menu.

1 Display the sub-menu of the DOLBY DIGITAL function.

2Press the 6 buttons to choose TEST MODE. Then press the 5 buttons to

choose ON.

Test signals are output from each of the speakers in turn.

When using the front speaker system and/or subwoofer system with the TV:

Turn on the power of each amplifier, slowly increase the amplifier’s volumes until the sound emitted from each speaker connected to the system is about the same as that of the sound emitted from the TV speakers. Note that increasing the amplifier volume too high may damage the speakers.

Stopping the test signal:

Press the 6 buttons to choose TEST MODE and press the 5 buttons to choose OFF.

3Press the 6 buttons to adjust the

sound volume of each of the speakers.

Adjust the sound volumes so that you can listen to the sounds at the same volume when you are sitting where you would normally sit to watch the TV.

LEFT/RIGHT:

The left or right of the front speakers

CENTRE:

The centre speaker

LS/RS:

The left or right of the surround speakers

If REAR SPEAKER is set to OFF, LS and RS are not displayed.

4Press the abutton to complete the

settings.

The menu disappears.

Note:

When using the front speaker system or subwoofer system with the TV, it is recommend that this TEST MODE is used to adjust the speaker volume levels each time the system is used.

22

Image 23
Contents KLEURENTELEVISIEFARBFRNSEHGERƒT CouleurContents Preparation Connecting the Aerial and VCRConnecting the power cord to the AC outlet Putting Batteries into the Remote ControlD0001-EN Initial SettingsIf ACI START/ACI Skip appears in the Auto To cancel the Auto Program functionWhen not using the EDIT/MANUAL function 20%Direct Rec TV Auto Power On/VCR Image ViewLink Functions Pre-set DownloadChoose a TV channel Turn the Main power onPress the Main power button on the TV Basic OperationWatch images from external Devices Adjust the volumePress the 5 buttons to adjust the volume Behind the Cover Press the r Volume buttonVolume level indicator appears Operating with the buttons on the TVZoom Button Muting ButtonNumber Buttons 3D Button Choose the Zoom modeAdjusting the visible area of the picture Press the abutton to display the Zoom mode indicationButtons = VCR/DVD Control Buttons VCR P DVD SwitchInformation Button TV ButtonBasic operation ~ Teletext Control Buttons and VCR P DVD SwitchUsing the List Mode D0012-ENSub-page CancelHold SizeTo exit a menu instantly OFFMenu Operation To return to the previous menuMode ECO ModeTint TintntrastDigital VNR DigiPure ProDigital VNR D0015-ENNtsc Colour System Auto AspectPicture Tilt Press the 5 buttons to choose the appropriate colour systemSpeaker BBEHeadphone Change the settingTo adjust the volume of the headphones Subwoofer3D-PHONIC Digital SurroundDolby Digital Other surround functions 3D-PHONIC settingDolby Digital setting Press the OK button to complete SettingLeft or right of the front speakers Adjusting the volume balance with the Test ModeStopping the test signal Test signals are output from each of the speakers in turnDIGITAL-IN EXT SettingDIGITAL-IN S-VIDEO inputID List DubbingTvback D0 022-ENChild Lock FeaturesSleep Timer Blue BackTo view a locked TV channel D0028-ENDecoder EXT-2 CH10 IstallBackok D0029-ENMove Manual AC OKK Delete InsertD0 031-EN IBBC1 DBack OK Idlist D0034-EN PRAV1 IBBC1 DCH/ TVC C Press the 3 button to choose Press the green or red button to search For a TV channelPress the yellow button to delete the TV Channel To stop the demonstration When the Demo function is set to onPress one of the buttons on the remote control To display the Demo menuAdditional Menu Operations Using the ACI functionChanging the Country setting D0037-ENMenu Using the Decoder EXT-2 FunctionD0023-EN Press the a button to displayDigital Back Coaxial of the TV Connecting the external devicesBefore connecting anything Additional PreparationLink compatible VCR Connecting headphonesVideo/sound signal output from the EXT-2 terminal Listening to Dolby Digital AudioPositioning of speakers Using additional audio equipmentsConnect the audio equipments to the TV Rear Speaker function Speaker functionTV Speaker function Subwoofer functionChannel CH/CC NumberRear Panel Remote control sensor and ECO sensor Power lampTV Buttons and Parts Front PanelTroubleshooting Other concerns Model AV32Z10EU Specifications

AV32Z10EU specifications

The JVC AV32Z10EU is a distinguished television model that showcases JVC’s dedication to quality and innovation in the realm of home entertainment. This 32-inch CRT television, favored during its time for its robust performance, presents an array of features and technologies that were at the forefront of television design.

One of the standout characteristics of the AV32Z10EU is its high-quality picture display, which utilizes a sophisticated CRT technology. This model is equipped with a flat screen that not only reduces reflections but also enhances the clarity of images. The screen resolves resolutions up to 768 x 576 pixels, which was considered high-definition for CRT televisions, offering viewers a satisfying visual experience. The color reproduction is vivid, delivering a rich palette that ensures that images pop with vibrancy.

The JVC AV32Z10EU boasts a dynamic contrast ratio that ensures deeper blacks and brighter whites, allowing for a more immersive viewing experience. The incorporation of advanced digital signal processing also elevates the TV’s performance, enhancing the details in both shadows and highlights, making on-screen content more realistic and captivating.

In terms of connectivity, the AV32Z10EU includes multiple input options, such as SCART connectors and composite video inputs, which allow for easy linking with various multimedia devices. This flexibility enables viewers to connect DVD players, gaming consoles, and other media devices, making it a versatile choice for all forms of entertainment.

JVC engineers designed the AV32Z10EU with user-friendly features such as an intuitive remote control that simplifies navigation through channels and settings. The model also incorporates a built-in teletext feature, allowing viewers to access information and updates conveniently without needing an external decoder.

With its blend of performance, reliable technology, and user-centric design, the JVC AV32Z10EU has carved a niche for itself among consumers looking for a dependable television set. Although modern advancements have shifted towards flat-panel TVs, the nostalgic charm and robust feature set of the AV32Z10EU continue to be appreciated by enthusiasts of classic television technology.