JVC AV32Z10EU manual EXT Setting, Digital-In, S-VIDEO input

EXT SETTING

			EXTSETTING			Note:
						• The EXT-1 terminal does not support S-VIDEO
				1	DUBBING	signal (Y/C signal) and you cannot set S-IN (S-
						VIDEO input) in the EXT-1 terminal.
				3
					EXT-2	• Setting S-IN (S-VIDEO input) changes the head
			EXT-4
						character from “E” to “S”. For example, “E2” is
			TV			changed to “S2”.
						• Even an device which enables the S-VIDEO signal
		TV BACKOK			IDLIST
						(Y/C signal) to be output may output a regular video
					S-IN	signal (composite signal) depending on the device
	D0020-EN				DIGITAL-IN	setting. If a picture cannot appear because S-IN (S-
						VIDEO input) setting has been made, read the
To display EXT SETTING menu:						device Instruction Manual carefully again to check
						for the device settings.
			1 Press the abutton to display MENU			! DIGITAL-IN
				(main menu).
			2 Press the 6 button to choose EXT			When connecting a device (such as DVD player) which
						enables Dolby Digital audio signal to be putput, you can listen
				SETTING. Then press the abutton.
						to Dolby Digital audio.

ENGLISH

!S-IN (S-VIDEO input)

When connecting a device (such as S-VHS VCR) which enables an S-VIDEO signal (Y/C signal) to be output, you can enjoy high-quality picture of the S-VIDEO signal (Y/C signal).

Preparation:

•At first, read the Device Instruction Manual and “ADDITIONAL PREPARATION” on page 35 to connect the device to the TV properly. Second, follow the Device Instruction Manual to set the device so that a S-VIDEO signal (Y/C signal) can be output to the TV.

•Do not set S-IN (S-VIDEO input) to the EXT terminal connected to a device which cannot output a S-VIDEO (Y/ C signal). If it is set wrongly, a picture cannot appear.

1 Press the6 buttons or5 buttons to choose an EXT terminal.

2Press the yellow button and set the S-IN

(S-VIDEO input).

A y (S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite signal).

To cancel the S-IN (S-VIDEO input) setting:

Press the yellow button and turn off y (S-VIDEO input) mark. The regular video signal (composite signal) pictures are resumed.

3Press the abutton to complete the

setting.

The menu disappears.

Preparation:

•In order to listen to Dolby Digital audio, correctly connect a device to the TV in accordance with “Listening to Dolby Digital audio” on page 36.

•If DIGITAL-IN is set by mistake when no device is connected to the DIGITAL AUDIO IN terminal, no sound is emitted.

1 Press the 6buttons or 5buttons to choose an EXT terminal.

2Press the green button to set the

DIGITAL-IN.

Pressing the green button repeatedly until the mark which is the same as the type of cable connected to the DIGITAL AUDIO IN terminal is selected.

:Select this mark when connected with coaxial cable.

:Select this mark when connected with optical cable.

To cancel the DIGITAL-IN setting:

Press the green button to turn off the mark of DIGITAL- IN.

3Press the abutton to complete the

setting.

The menu disappears.

Note:

•DIGITAL-IN cannot be set for the TV and EXT-4 terminal.

•This TV does not work with digital audio signals other than Dolby Digital audio. If no sound is emitted from the speakers, cancel the DIGITAL-IN setting and change to normal analog sounds.

23