JVC AV32Z10EU manual Features, Blue Back, Sleep Timer, To set the Child Lock function

Page 26

FEATURES

 

S PTIMER

 

 

 

CHILDLOCK

-2)

OFF ON

1 Press the 6 buttons to choose BLUE

TVDECOBACKDER(EXTOK

FEATURES

 

 

! BLUE BACK

BUBACK

 

 

You can set the TV to automatically change to a blue screen

 

 

and mute the sound if the signal is weak or absent, or when

 

 

 

there is no input from an external device.

D0023-EN

BACK.

2 Press the 5 buttons to choose ON.

 

To display the FEATURES menu:

1Press the abutton to display MENU (main menu).

2Press the 6 button to choose FEATURES. Then press the a button.

!SLEEP TIMER

You can set the TV to automatically turn off after a specified period of time.

1 PressSLEEPTIMERthe 6 buttons to choose SLEEP TIMER. Then press the abutton.

AOFFSub-menu0of the SLEEP120TIMER function appears.

D0024TV-EN BACKOK

2Press the 5 buttons to set the period

of time.

You can set the period of time a maximum of 120 minutes (2 hours) in 10 minute increments.

To cancel the SLEEP TIMER function:

Press the 2 button to set a period of time to “OFF.”

To cancel the BLUE BACK function:

Press the 5 buttons to choose OFF.

3Press the abutton to complete the

setting.

The menu disappears.

!CHILD LOCK

When there is a TV channel you wish your children not to watch, you can use the CHILD LOCK function to lock out the TV channel. Even when a child chooses a Programme number (PR) in which a locked TV channel has been registered, the screen will change to blue and displays n

(CHILD LOCK) so the TV channel cannot be viewed. Unless you enter a pre-set ID number by a special operation, the lock cannot be released and the child cannot view the TV channel programmes.

To set the CHILD LOCK function

1 PressSETIDNOthe. 6 buttons to choose CHILD LOCK. Then press the o button.

“SETD0025TV-ENIDBACKOKNO0000.” (ID number setting screen) appears.

ENGLISH

3Press the abutton to complete the

settings.

The menu disappears.

Note:

•One minute before the SLEEP TIMER function turns off the TV, “GOOD NIGHT!” appears.

•The SLEEP TIMER function cannot be used to turn off the TV’s main power.

•When the SLEEP TIMER function is on, you can display the Sub-menu of the SLEEP TIMER function again to confirm and/or change the remaining period of time of the SLEEP TIMER function. Press the abutton to exit the menu after confirming and / or changing the remaining time.

2Set the ID number to your liking.

1Press the 6 buttons to choose a number.

2Press the 5 buttons to move the cursor.

3Press the abutton.

TheCHILDPRAV321SubLOCK-menuIDBBC1of CHILD/CCLOCK321

appears.

4

 

 

4

 

 

5

 

H

5

 

 

6

 

26

 

 

7

 

 

1

 

 

8

BACOKK

CC

2

LOCK

 

TV09

03

 

D0026-EN

 

 

 

 

 

25

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Couleur KLEURENTELEVISIEFARBFRNSEHGERƒTContents Putting Batteries into the Remote Control Connecting the Aerial and VCRConnecting the power cord to the AC outlet PreparationInitial Settings D0001-EN20% To cancel the Auto Program functionWhen not using the EDIT/MANUAL function If ACI START/ACI Skip appears in the AutoPre-set Download TV Auto Power On/VCR Image ViewLink Functions Direct RecBasic Operation Turn the Main power onPress the Main power button on the TV Choose a TV channelWatch images from external Devices Adjust the volumePress the 5 buttons to adjust the volume Operating with the buttons on the TV Press the r Volume buttonVolume level indicator appears Behind the CoverZoom Button Muting ButtonNumber Buttons Press the abutton to display the Zoom mode indication Choose the Zoom modeAdjusting the visible area of the picture 3D ButtonTV Button = VCR/DVD Control Buttons VCR P DVD SwitchInformation Button ButtonsD0012-EN ~ Teletext Control Buttons and VCR P DVD SwitchUsing the List Mode Basic operationSize CancelHold Sub-pageTo return to the previous menu OFFMenu Operation To exit a menu instantlyTintntrast ECO ModeTint ModeD0015-EN DigiPure ProDigital VNR Digital VNRPress the 5 buttons to choose the appropriate colour system Colour System Auto AspectPicture Tilt NtscBBE SpeakerSubwoofer Change the settingTo adjust the volume of the headphones Headphone3D-PHONIC Digital SurroundDolby Digital Press the OK button to complete Setting 3D-PHONIC settingDolby Digital setting Other surround functionsTest signals are output from each of the speakers in turn Adjusting the volume balance with the Test ModeStopping the test signal Left or right of the front speakersS-VIDEO input EXT SettingDIGITAL-IN DIGITAL-IND0 022-EN DubbingTvback ID ListBlue Back FeaturesSleep Timer Child LockTo view a locked TV channel D0028-ENDecoder EXT-2 D0029-EN IstallBackok CH10AC OKK Delete Insert Move ManualD0 031-EN IBBC1 DBack OK Idlist D0034-EN PRAV1 IBBC1 DCH/ TVC C Press the 3 button to choose Press the green or red button to search For a TV channelPress the yellow button to delete the TV Channel To display the Demo menu When the Demo function is set to onPress one of the buttons on the remote control To stop the demonstrationD0037-EN Using the ACI functionChanging the Country setting Additional Menu OperationsPress the a button to display Using the Decoder EXT-2 FunctionD0023-EN MenuAdditional Preparation Connecting the external devicesBefore connecting anything Digital Back Coaxial of the TVListening to Dolby Digital Audio Connecting headphonesVideo/sound signal output from the EXT-2 terminal Link compatible VCRPositioning of speakers Using additional audio equipmentsConnect the audio equipments to the TV Subwoofer function Speaker functionTV Speaker function Rear Speaker functionCH/CC Number ChannelFront Panel Remote control sensor and ECO sensor Power lampTV Buttons and Parts Rear PanelTroubleshooting Other concerns Specifications Model AV32Z10EU

AV32Z10EU specifications

The JVC AV32Z10EU is a distinguished television model that showcases JVC’s dedication to quality and innovation in the realm of home entertainment. This 32-inch CRT television, favored during its time for its robust performance, presents an array of features and technologies that were at the forefront of television design.

One of the standout characteristics of the AV32Z10EU is its high-quality picture display, which utilizes a sophisticated CRT technology. This model is equipped with a flat screen that not only reduces reflections but also enhances the clarity of images. The screen resolves resolutions up to 768 x 576 pixels, which was considered high-definition for CRT televisions, offering viewers a satisfying visual experience. The color reproduction is vivid, delivering a rich palette that ensures that images pop with vibrancy.

The JVC AV32Z10EU boasts a dynamic contrast ratio that ensures deeper blacks and brighter whites, allowing for a more immersive viewing experience. The incorporation of advanced digital signal processing also elevates the TV’s performance, enhancing the details in both shadows and highlights, making on-screen content more realistic and captivating.

In terms of connectivity, the AV32Z10EU includes multiple input options, such as SCART connectors and composite video inputs, which allow for easy linking with various multimedia devices. This flexibility enables viewers to connect DVD players, gaming consoles, and other media devices, making it a versatile choice for all forms of entertainment.

JVC engineers designed the AV32Z10EU with user-friendly features such as an intuitive remote control that simplifies navigation through channels and settings. The model also incorporates a built-in teletext feature, allowing viewers to access information and updates conveniently without needing an external decoder.

With its blend of performance, reliable technology, and user-centric design, the JVC AV32Z10EU has carved a niche for itself among consumers looking for a dependable television set. Although modern advancements have shifted towards flat-panel TVs, the nostalgic charm and robust feature set of the AV32Z10EU continue to be appreciated by enthusiasts of classic television technology.
Top Page Image Contents