JVC AV32P10EK, AV32L5EK, AV32P10EI, AV32L5EI specifications Other menus, Using the ACI function

Page 35

Other menus

■Using the ACI function

This TV has an ACI function which decodes the ACI (automatic channel installation) data.

Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly, using the data from the cable TV station.

Caution:

If your cable TV station broadcasts ACI data and if “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu, the ACI function is enabled. In all other cases, it is disabled.

1 Press the 6 button to choose ACI START. Then press the abutton to start the ACI function

When you don't want to use the ACI function:

Press the 6 button to choose ACI SKIP and then press the abutton.

If the AUTO PROGRAM menu changes to another menu:

Depending on your cable TV station, there may be a broadcast selection menu set up by the cable TV station.

Follow the menu instructions and use the 5 and 6 buttons to operate the menu. After you have made the setting, press the abutton.

If “ACI ERROR” is displayed in the AUTO PROGRAM menu:

“ACI ERROR” means that the ACI function is not working properly. Press the abutton to start the ACI function again.

If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press the 3button to start the AUTO PROGRAM function. It does not cause any problems because all the TV channels are registered to the programme numbers (PR) by the AUTO PROGRAM function.

2When the settings are completed, the EDIT menu is displayed. Return to the instructions that you were reading before, and continue

When the “Initial Settings” have been made:

Return to step 5 of “Initial settings” on page 6

When the “AUTO PROGRAM” has been made:

Return to step 3 of “AUTO PROGRAM” on page 30

•If you have any questions about the items in the cable TV station’s broadcast selection menu or how to operate the menu, please contact your cable TV station.

•When the cable TV broadcast reception is poor, the ACI function will not work properly.

•If there is an error in the ACI data itself, the TV channel cannot be registered properly. If this happens, turn the ACI function off (ACI SKIP) and use the AUTO PROGRAM function, or the EDIT/MANUAL function to correct the programme number (PR) setting.

■Downloading data to a VCR

You can send the latest programme numbers (PR) data to a VCR with the T-V LINK function.

•You can only do this when a T-V LINK compatible VCR is connected to the EXT-2 terminal.

•This only works when the T-V LINK menu is being displayed.

T-V LINK

DOWNLOAD TV VCR

BACK

TV OK

EXIT

D0005-EK

1Turn on the VCR

2Press the abutton

The data transmission begins.

DOWNLOAD TV VCR

TRANSFER. . . . .

D0037-EK

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu changes over to another menu:

The TV has finished its menu. This new menu is operated from the VCR. See the VCR instruction manual for what to do next.

•If “FEATURE NOT AVAILABLE” appears at the T-V

LINK menu, check the following three items. Then press the abutton to retry data transmission.

−Has a T-V LINK compatible VCR been connected to the EXT-2 terminal?

−Has the VCR power been turned on?

−Does the SCART cable that connects the EXT-2 terminal to the T-V LINK compatible VCR have all its proper connections?

■Using the DECODER (EXT-2) function

If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the decoder power

2Display the scrambled TV channel on the

TV

Even if the decoder is working, a scrambled picture appears.

3Press the abutton to display the MENU

The MENU (main menu) appears.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents AV32L5EK* UK model AV32L5EI* Ireland model SpecificationsIf in doubt consult a competent electrician Safety precautionsGuidelines for safe operation Putting batteries into the remote control Setting up your TVConnecting the aerial and video cassette recorder VCR Connecting the power cord to the mains outletPress the main power button on the TV Initial settingsIf you do not have a T-V Link compatible VCR connected To cancel the Auto Program functionFor UK model AV32P10EK/AV32L5EK For Ireland model AV32P10EI/AV32L5EIDirect Rec TV auto power on/VCR Image viewLink functions Pre-set downloadChoose a TV channel Using your TV-the basicsTurn the main power on Turn the TV on from standby modeWatching images from External equipment Changing the volumeAV32L5EK and AV32L5EI Side of the TV Using the buttons on the TVAV32P10EK and AV32P10EI Behind the CoverZoom button Remote control buttons and functionsMuting button Number buttonsZoom Subtitle Adjusting the visible area of the pictureChoose the Zoom mode 3D Button Only AV32P10EK AV32P10EIOK button VCR P DVD switchInformation button Colour buttonsPress the PIP button ~ Freeze button@# PIP control buttons Press the Freeze buttonPress and hold down the Pbutton $ Teletext control buttons and VCR P DVD switchUsing the List Mode Basic operationReveal CancelHold Sub-pagePress the abutton to display Menu main menu Using the TV’s menusTint Picture settingPicture adjustment ECO ModeVNR Picture featuresDigital VNR DigiPure ProPIP Position Colour SystemAuto Aspect Picture TiltBBE Sound settingSound adjustment StereoSubwoofer Subwoofer Only AV32P10EK and AV32P10EIHeadphone Press the 6buttons to choose3D-PHONIC To cancel a surround functionDigital Surround Only AV32P10EK and AV32P10EI Dolby DigitalOther surround functions 3D-PHONIC settingDolby Digital setting Press the OK button to complete the settingStopping the test signal Adjusting the volume balance with the Test ModeDIGITAL-IN Only AV32P10EK and AV32P10EI To cancel the S-IN S-VIDEO input settingTo cancel the DIGITAL-IN setting S-VIDEO inputTo erase a name assigned to the EXT terminal ID ListDubbing To set the Child Lock function Sleep TimerBlue Back Child LockPress the number buttons to enter the ID Number Decoder EXT-2To view a locked TV channel Press the blue button and set the Child Lock functionProgram LanguageAuto Program Press the 6 buttons to choose a new programme number PR To cancel the Move functionEDIT/MANUAL Press the 3 button to start the Move functionFor Ireland model AV32P10EI/AV32L5EI Press the red button to start the ID functionPress the 6 buttons to choose the channel name ID Press the abutton to give a channel name ID to a TV channelPress the green or red button to search for TV channel To cancel the Manual functionCH/CC Number Press the yellow button to delete the TV channelTo stop the demonstration When the Demo function is set to onDownloading data to a VCR Using the ACI functionUsing the Decoder EXT-2 function Other menusTo cancel the Decoder EXT-2 function Behind the Cover Connecting external equipmentBefore connecting anything Further preparationLink compatible VCR Connecting headphonesVideo or sound signal output from the EXT-2 terminal Listening to Dolby Digital audio Only AV32P10EK AV32P10EIPositioning of speakers Using additional audio EquipmentBefore connecting anything Connect the audio equipment to the TVSpeaker function AV32L5EK and AV32L5EI AV32P10EK and AV32P10EI TV buttons and partsFront panel Rear PanelTroubleshooting Specifications
Top Page Image Contents