| PICTURE FEATURES |
■ COLOUR SYSTEM | ■ 4:3 AUTO ASPECT |
The colour system is chosen automatically. However, if the | You can choose one of three ZOOM modes, REGULAR, |
picture is not clear or no colour appears, choose the colour | PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the nor- |
system manually. | mal picture (4:3 aspect ratio). |
1Press the 6 buttons to choose COLOUR SYSTEM. Then press the abutton.
The
COLOUR SYSTEM
PAL
BACK
TV OK
2Press the 5 buttons to choose the ap- propriate colour system.
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input sig- nal. Only when you are viewing a picture from Pro- gramme number PR 0 (AV), or EXT terminal, you can choose using the AUTO function.
3Press the a button to complete the set- ting.
The menu disappears.
Note:
•The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.
•When in the Programme numbers PR 0 (AV) to PR 99, you cannot choose NTSC 3.58 or NTSC 4.43.
1Press the 6 buttons to choose 4:3 AUTO ASPECT. Then press the abutton.
The
4:3 AUTO ASPECT
PANORAMIC REGULAR 14:9 ZOOM
BACK
TV OK
2Press the 6 buttons to choose a ZOOM mode.
3Press the a button to complete the set- tings.
The menu disappears.
■PICTURE TILT
(Excluding AV28WH5EU)
There are cases where the Earth’s magnetic force may make the picture tilt. If this happens, you can correct the picture tilt.
1Press the 6 buttons to choose PICTURE TILT. Then press the abutton.
The
PICTURE TILT
BACK
TV OK
2Press the 6 buttons until the picture be- comes level.
3Press the a button to complete the set- ting.
The menu disappears.
ENGLISH
17