JVC AV32L2EU, AV28L2EU, AV32X10EU, AV28X10EU, AV32H10EU, AV28H10EU Additional Menu Operations

Page 29

ADDITIONAL MENU OPERATIONS

■Using the ACI function

This TV has an ACI function which decodes the ACI (auto- matic Channel Installation) data.

Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly ac- cording to the data from the cable TV station.

Caution:

If your cable TV station broadcasts ACI data and if “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu, the ACI function is enabled. In all other cases, it is disabled.

1 Press the 6 button to choose ACI START. Then press the abutton to start the ACI function.

When you don't want to use the ACI function:

Press the 6 button to choose ACI SKIP and then press the abutton.

If the AUTO PROGRAM menu changes to another menu:

Depending on your cable TV station, there may be a broadcast selection menu set up by the cable TV station.

Follow the menu indications and use the 5 and 6 buttons to operate the menu. After you have made the setting, press the abutton.

If “ACI ERROR” is displayed in the AUTO PROGRAM menu:

“ACI ERROR” denotes that the ACI function is not work- ing properly. Press the abutton to start the ACI func- tion again.

If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press the 3 button to start the AUTO PROGRAM function. It does not cause any problem because all the TV channels are registered to the Programme numbers (PR) by the AUTO PRO- GRAM function.

2When the settings are completed, the EDIT menu is displayed. Return to the instruc- tions that you were reading before, and continue the operation.

When the “Initial Settings” has been made:

Return to step 6 of “Initial Settings” on page 4.

When the “AUTO PROGRAM” has been made:

Return to step 4 of “AUTO PROGRAM” on page 23.

Note:

•If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station.

•When the cable TV broadcast reception is poor, the ACI function will not work properly.

•If there is an error in the ACI data itself, the TV chan- nel cannot be registered properly. If this happens, turn the ACI function off (ACI SKIP) and use the AUTO PROGRAM function. Alternatively, use the EDIT/MANUAL function to correct the Programme number (PR) setting.

■Downloading the data to VCR

You can transmit to the latest Programme numbers (PR) data to the VCR with the T-V LINK function.

Caution:

•Only when the T-V LINK compatible VCR is connected to the EXT-2 terminal, this operation is enabled.

•Only when the T-V LINK menu is being displayed, this oper- ation is enabled.

T-V LINK

DOWNLOAD TV VCR

BACK

TV OK

EXIT

D0005-EN

1Turn on the VCR.

2Press the a button.

The data transmission begins.

DOWNLOAD TV VCR

TRANSFER. . . . .

D0037-EN

The T-V LINK menu disappears once the data transmis- sion ends.

When the T-V LINK menu is changed over to another menu:

The menu operation at the TV side is completed and it is shifted to the menu operation at the VCR side. Refer to the VCR Instruction Manual and operate the VCR.

Note:

•If “FEATURE NOT AVAILABLE” appears at the T-V

LINK menu, ensure the following three items are cor- rect; then press the a button to retry data trans- mission.

−Has the T-V LINK compatible VCR been connect- ed to the EXT-2 terminal?

−Has the VCR power been turned on?

−Does the SCART cable that is connected to the EXT-2 terminal to T-V LINK compatible VCR have all proper connections?

■Changing the COUNTRY set- ting

After the AUTO PROGRAM function is completed, you can change the country you have already set by using the AUTO PROGRAM function.

When registering the TV channels for French broadcast stations (SECAM-L system), perform this operation to change the country.

1Display the INSTALL menu.

When the EDIT menu is currently being dis- played:

Press the h (Information) to return to the INSTALL menu.

28

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Colour Television Contents Connecting the power cord to the AC outlet Connecting the Aerial and VCRPutting Batteries into the Remote Control PreparationPress the Main power button on the TV Initial SettingsWhen not using the EDIT/MANUAL function To cancel the Auto Program functionWhen a T-V Link compatible VCR is not con- nected When a T-V Link compatible VCR is connectedWhen Feature not Available is displayed TV Auto Power On/VCR Image ViewLink Functions Pre-set DownloadTurn the TV on from standby mode Turn the Main power onBasic Operation Choose a TV channelWatch images from external Devices Adjust the volumeTo return to a TV channel To use the Programme number PR 0 AVOperating with the buttons on the TV Zoom Button Muting ButtonNumber Buttons Adjusting the visible area of the pic- ture Choose the Zoom modeHyper Sound Button Zoom SubtitleInformation Button = VCR/DVD Control Buttons VCR P DVD SwitchStandby Button Colour ButtonsUsing the List Mode ~ Teletext Control Buttons and VCR P DVD SwitchBasic operation Press g Text button to display the tele- textHold CancelSize Sub-pagePress the a button to display Menu main menu Menu OperationECO Mode Picture SettingPicture Adjustment TintDigital VNR Picture FeaturesDigiPure Pro Excluding AV32H10EU/ AV28H10EU/AV28WH5EUPicture Tilt Colour System Auto AspectExcluding AV28WH5EU NtscStereo / I Sound SettingSpeaker BBEID List EXT SettingS-VIDEO input Press the 5 buttons to choose the arrow from the menu DubbingPress the 6 buttons to choose an EXT terminal or TV EXT-1/EXT-3/EXT-4Sleep Timer FeaturesBlue Back Child LockTo view a locked TV channel Decoder EXT-2Press the 6 buttons to choose a TV channel Press the blue button and set the Child Lock functionAuto Program InstallLanguage EDIT/MANUAL Install Tion Channel name list Press the 3 button to start the Move func Press the 6 buttons to choose a new Programme number PR Press the red button to start the ID func- tionPress the yellow button to delete the TV channel Press the green button and start the IN- Sert functionPress the blue button to activate the MAN- UAL function Press the green or red button to search for TV channelDemo When the Demo function is set to onTo stop the demonstration To display the Demo menuAdditional Menu Operations Using the ACI functionDownloading the data to VCR Changing the Country set- tingTurn on the Decoder power Using the Decoder EXT-2 FunctionTo cancel the Decoder EXT-2function To return to the Install menu from the Country menuOFF Setting the Speaker functionAdditional Preparation Connecting the external devicesBefore connecting anything Connecting headphones ConnectingSpeakers/AmplifierVideo/sound signal output from the EXT-2 terminal Link compatible VCRChannel CH/CC NumberFront Panel TV Buttons and PartsRear Panel TroubleshootingIf you cannot turn on the TV No picture/No soundOther concerns Operation disabledPoor sound Model SpecificationsDesign and specifications subject to change without notice AV32X10EU AV28X10EUAV32H10EU AV28H10EUVictor Company of JAPAN, Limited
Top Page Image Contents