PREPARATION
■Connecting the Aerial and VCR
If connecting a VCR, follow A → B → C . If not connecting a VCR, follow 1.
To operate
Note:
•For further details, refer to the manuals provided with the devices to be connected.
•The connecting cables are not provided.
•A video can be viewed from the VCR without performing C. For details, refer to your VCR instruction manual.
•To connect additional external devices, please see “AD- DITIONAL PREPARATION” on page 31.
•To connect speakers and amplifier, please see “Con- necting Speakers/Amplifier (Excluding AV28WH5EU)” on page 32.
•When a decoder is connected to a
Aerial
Back of the TV 75-ohm
Coaxial
Cable
SS
L |
R
AUDIO OUT
| ||
Coaxial | ||
Cable | ||
Cable | ||
|
VCR | To Aerial |
Input |
AV IN/OUT
Terminal
To Aerial Output
■Connecting the power cord to the AC outlet
Caution:
•Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit.
■Putting Batteries into the Remote Control
Use two AAA/R03 dry cell batteries.
Insert the batteries from the - end, making sure the + and - polarities are correct.
To open the battery compartment, slide the door downwards and lift off. Replace the door by sliding it upwards until it is secure.
Note:
• Follow the warnings printed on the batteries.
• Battery life is about six months to one year, depending on your frequency of use.
•If the remote control does not work properly, replace the batteries.
•The batteries we supply are only for setting up and test- ing your TV, please replace them as soon as necessary.
•Always use good quality batteries.
2