JVC AV-28WFT1EI To cancel the Auto Program function, When not using the EDIT/MANUAL function

PREPARATION

4 Press the 3 button to start the AUTO PROGRAM function.

The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR).

To cancel the AUTO PROGRAM function:

Press the 4button.

5 After the TV channels have been regis- tered in the Programme numbers (PR), the EDIT menu appears.

You can proceed to edit the Programme numbers (PR) using the EDIT/MANUAL function. For details, see “ED- IT/MANUAL” on page 26.

When not using the EDIT/MANUAL function:

If you do not need to use the EDIT/MANUAL function, go to the next step.

6 Press the 3 button to display the T-V LINK menu.

7 Operate the T-V LINK menu according to the type of a VCR connected to the EXT-2 terminal.

When a T-V LINK compatible VCR is not con- nected:

Press the 4button to exit the T-V LINK menu. The T-V LINK menu disappears.

When a T-V LINK compatible VCR is connected:

Follow the operating procedure “Downloading the data to VCR” on page 30 to transmit the Programme number (PR) data.

8 Now, the initial settings are complete, and you can watch the TV.

Note:

∙When you TV can detect the TV channel name from the TV channel broadcast signal, it automatically registers the TV channel name (ID) to the Pro- gramme number (PR) in which the TV channel has been registered.

∙If a TV channel you want to view is not set to a Pro- gramme number (PR), manually set it using the MANUAL function. For details, see “EDIT/MANUAL” on page 26.

∙The TV channel is not registered in Programme number PR 0 (AV). When you want to register a TV channel to PR 0 (AV), manually set it using the MAN- UAL function. For details, see “EDIT/MANUAL” on page 26.

9