BASIC OPERATION
2Press the ìand ëbuttons to choose a Programme number (PR). Then press the 3 button.
Note:
∙For Programme numbers (PR) with the CHILD LOCK function set, the @(CHILD LOCK) mark is displayed next to the Programme number (PR) in the PR LIST
∙You cannot use the ë buttons to choose a Pro- gramme number (PR) with the CHILD LOCK fun- tion set.
∙Even if you try to choose a Programme number (PR) with the CHILD LOCK function set, the @ (CHILD LOCK) mark will appear, and you cannot watch the TV channel. To watch the TV channel, see “CHILD LOCK” on page 23.
∙If the picture is tilted, correct it. See “PICTURE TILT” on page 19.
■$GMXVW#WKH#YROXPH
Press the ìbuttons to adjust the vol- ume.
The Volume indicator appears and the volume changes as you press the Cbuttons.
■:DWFK#LPDJHV#IURP#H[WHUQDO#
GHYLFHV
Choose an EXT terminal to which the desired external device has been connected.
Use the Abutton:
Press the Abutton to choose an EXT terminal. Pressing the Abutton changes the choice as follows:
TV mode | EXT modes |
Programme | |||
numbers | |||
|
| ||
PR 1 – PR 99 |
|
| |
|
Use the ë buttons:
Press the ë buttons to choose an EXT terminal
Use the PR LIST:
1 Press the 9 (Information) button to display the PR LIST.
2Press the ìand ëbuttons to choose an EXT terminal. Then press the 3button.
Note:
∙The EXT terminals are registered after the Pro- gramme number PR 99.
∙You can choose a video input signal from the
EO signal (Y/C signal) and regular video signal (composite signal). For details, see
∙If you do not have a clear picture or no colour ap- pears, change the colour system manually. See “COLOUR SYSTEM” on page 18.
∙When choosing an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.
∙This TV set has a function which can automatically change over the input according to a special signal output from an external device.(The
To return to a TV channel:
Press the 4button, the ëbuttons or the Number but- tons.
To use the Programme number PR 0 (AV):
When the TV and VCR are connected only by the Aerial cable, choosing the Programme number PR 0 (AV) al- lows you to view images from the VCR. Set the VCR RF channel to the Programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 26.
Pressing the Abutton changes the choice as follows:
TV mode | EXT modes |
Programme | PR 0 | ||
numbers |
|
|
|
PR 1 – PR 99 |
|
|
|
|
|
Note:
∙The VCR RF channel is sent as the RF signal from the VCR.
∙Also refer to your VCR instruction manual.
<