JVC AV-29MT36, AV-21MT36 DVD function, Auto Signal Detect, DVD Picture Mode, Tint Color

Page 14

DVD function

AUTO SIGNAL DETECT

When the DVD input signal is detected. The input mode will be changed to VIDEO-2 automatically.

For The DVD player, press the “POWER ON” button of the machine so that the signal can be detected.

For the VCR, press the “POWER ON” button of the machine, and then press the “PLAY” button, so that the signal can be detected and display DVD menu.

Select the AUTO SIGNAL DETECT in DVD MENU under FEATURES menu then choose ON or OFF (Factory setting is ON).

MENU FEATURES menu DVD MENU

AUTO SIGNAL DETECT

DVD PICTURE MODE

You can enhance the picture quality of the DVD or VIDEO-2. Select the DVD PICTURE MODE in DVD MENU under FEATURES menu, then choose the desired setting.

MENU FEATURES menu DVD MENU

DVD PICTURE MODE

OFF

Cancel the function.

CLEAR-1Select when the disc is with lots of noise (To soften the picture). CLEAR-2Select when the disc is with less noise (To sharpen the picture).

TINT COLOR

You can adjust the picture color tone of the DVD.

Select the TINT COLOR in DVD MENU under FEATURES menu, then adjust the level.

MENU FEATURES menu DVD MENU

TINT COLOR

14

WHITE BALANCE

You can change the white balance of the DVD picture.

Select the WHITE BALANCE in DVD MENU under FEATURES menu, then choose the desired setting.

MENU FEATURES menu DVD MENU

WHITE BALANCE

For details, see “WHITE BALANCE” on page 10.

SOUND MODE

You can choose the desired sound setting for the DVD.

Select the SOUND MODE in DVD MENU under FEATURES menu, then choose the desired setting.

MENU FEATURES menu DVD MENU

SOUND MODE

For details, see “SOUND MODE” on page 12.

CINEMA SURROUND

You can enjoy an enhanced sound for the DVD.

Select the CINEMA SURROUND in DVD MENU under FEATURES menu, then choose the desired setting.

MENU FEATURES menu DVD MENU

CINEMA SURROUND

For details, see “CINEMA SURROUND” on page 13.

This function is not available when the SOUND MODE is set to

SOUND TURBO.

When you use VIDEO-2 to display the DVD signal or Video signal then WHITE BALANCE, VNR function in PICTURE menu/DETAIL, TINT function in PICTURE SETTING menu/ SOUND MODE, CINEMA SURROUND function in SOUND menu cannot operate.

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Color Television 15 cm Confirm your TV’s functions Knowing your TV’s featuresMain features Remote control buttons and basic functions No. PressMenu Remote control buttons and basic functionsHow to operate menus and menus locations Front of the TV Remote control unitTV buttons and functions Rear of the TVJVC logo appears on the screen Setting up your TVConnecting the aerial cable Setting up your TV Making the initial settingsColor System Basic setting for picturePicture Mode Area Country or Region SystemBasic setting for picture Picture Setting White BalanceCorrecting the Slanting Picture Picture Tilt Advanced setting for pictureAI ECO Sensor ECO CompressBalance Basic setting for soundSound Mode Super Bass BassCinema Surround Advanced setting for soundAI Volume MTSDVD function Auto Signal DetectDVD Picture Mode Tint ColorVNR Customized settingOFF Timer Child LockDisplay Customized settingVIDEO-2 Setting Setup Tour LanguageAuto Program TV channel presettingTo register the TV channels automatically Channel SummaryAdditional preparation Connecting to front video input terminalBefore connecting Rear of TVPin on the bottom of the unit fits into the mounting hole on Is not held in place by a screw. When using the unit, payCorrectly on the TV Fall over and be damaged, or cause unexpected injuryTroubleshooting This may due to the magnetized device such as aSpecifications Victor Company of Japan, Limited FLE-JMT
Top Page Image Contents