Connect the External Equipments

Via the Euroconnector

Your TV set has two Euroconnector sockets. If you want to connect equipments (e.g. video recorder, decoder, etc.) which have Euroconnectors, to your TV, use the EXT.1 (EXT-1) or EXT.2 (EXT-2) terminals.

If an external device is connected via Euroconnector sockets TV is switched to AV mode automatically.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT-2 terminal. If not, the T-V LINK function will not work properly.

•When connecting a T-V LINK compatible VCR to the EXT-2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly. And then set the DECODER(EXT-2) function for the channel to ON to un- scramble a scrambled channel. For details, see “Decoder(EXT-2)” on page 10.

RGB mode

If an equipment can output the RGB signals, connect it to the EXT.1 (EXT-1) terminal.

EXT-2S Mode

If the equipment connected to your TV set supports S-Video (Y/C) output from Euroconnector, you can have a better pic- ture quality by selecting EXT-2S mode and connecting your equipment to the EXT.2 (EXT-2S) terminal of TV. See your equipment's booklet to check if your equipment has such feature.

Via the RCA jacks

If you have an equipment (such as a Camcorder) which has the RCA jacks, connect it to the Front AV (EXT-3) terminal with the video and audio cables.

•If the equipment has the mono audio jack, connect it to the AUDIO-L jack.

Via the ANT (aerial) socket

If your equipment does not have an Euroconnector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.

•To store the test signal that comes from the equipment, see “INSTALL Menu” on page 9 and store it to the pro- gramme number 0. You can watch images from that equip- ment to select the programme number which you stored the test signal.

TV and Video Recorder (VCR)

•Connect the Video Recorder to the ANT (antenna input) socket of the TV with the aerial cable.

•Connect the Video Recorder to the EXT.1 (EXT-1) or EXT.2 (EXT-2) terminal with the SCART cable, or connect it to the Front AV (EXT-3) terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press “AV“ button to select the corresponding AV mode.

NTSC 3.58/4.43 system is detected automatically in AV mode.

Copy Facility

You can output the video and audio signals which inputs from TV or EXT.1 (EXT-1) terminal to the video recorder connected to the EXT.2 (EXT-2) terminal.

•To select the output source, see “Setting External Source Output” on page 9.

Connecting Headphones

Use the stereo headphone socket of your TV, to connect headphones.

ENGLISH - 13 -