JVC AV 20F704, AV-24F704 manual To Memorize Channels, Automatic Channel Memory, TV/CATV Selection

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels.

Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV chan- nels. To use this TV with an antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the CATV setting.

AUTOMATIC CHANNEL MEMORY

1 Press the MENU button.		MENU
		CLOCK SET
2 Press the CH + (▲) or – (▼)		ON/OFF TIMER
		CH SETUP
		PICTURE
button until the indicator next to		AUDIO
		LANGUAGE / IDIOMA / LANGUE
“CH SETUP” begins to flash,		V-CHIP SET
	▲ / ▼ / ENTER / MENU / EXIT
then press the ENTER button.

TV/CATV SELECTION

3

Press the CH + (▲) or – (▼)

1 Press the MENU button.

2 Press the CH + (▲) or – (▼) button until the indicator next to “CH SETUP” begins to flash, then press the ENTER button.

MENU

CLOCK SET

ON/OFF TIMER

CH SETUP

PICTURE

AUDIO

LANGUAGE / IDIOMA / LANGUE

button until the indicator next to “AUTO CH MEMORY” begins to flash, then press the ENTER button. The TV will begin memorizing all the channels available in your area.

CH SETUP

TVCATV

AUTO CH MEMORY

ADD / DELETE

CH LABEL

▲/ ▼ / ENTER / MENU / EXIT

3 Press the CH + (▲) or – (▼) button until the indicator next to “TV/CATV” begins to flash.

4 Press the VOL + ( ) or – ( ) button to select the “TV” or “CATV” mode. The arrow indicates the selected mode.

V-CHIP SET

▲/ ▼ / ENTER / MENU / EXIT

CH SETUP

TVCATV AUTO CH MEMORY

ADD / DELETE

CH LABEL

▲ / ▼ // / MENU / EXIT

4	Press the EXIT button.
TO ADD/DELETE CHANNELS
1	Press the MENU button.		MENU
			CLOCK SET
2			ON/OFF TIMER
	Press the CH + (▲) or – (▼)		CH SETUP
			PICTURE
	button until the indicator next to		AUDIO
			LANGUAGE / IDIOMA / LANGUE
	“CH SETUP” begins to flash,		V-CHIP SET
		▲ / ▼ / ENTER / MENU / EXIT
	then press the ENTER button.

5 Press the EXIT button.

3 Press the CH + (▲) or – (▼) button until the indicator next to

CH SETUP TVCATV

NOTE: Contact your cable company to determine the type of cable system used in your area.

“ADD/DELETE” begins to flash, then press the ENTER button.

4 Select the desired channels to be added or deleted using the 10-key pad (0-9) or the CH + or

– button.

AUTO CH MEMORY

ADD / DELETE

CH LABEL

▲/ ▼ / ENTER / MENU / EXIT

5 Press the VOL + () or – () button to select “ADD” or “DELETE”.

If an unmemorized channel was selected (step 4), the channel indication will be red. Press the VOL + () or

–() button if you wish to ADD the unmemorized channel. The channel indicator will change from red to green when a channel is added and the channel will be memorized. If a memorized channel was selected (step 4), the channel indication will be green.

Press the VOL + () or – () button if you wish to DELETE the channel from

ADD	CH 012
memory. The channel indicator
will change from green to red
when a channel is deleted.
Repeat Steps 4 and 5 for each	/ / MENU / EXIT
0-9 / ▲ / ▼ /
channel to be added or deleted.

6 Press the EXIT button after adding or deleting all of the desired channels, to return to normal TV viewing.

14