Auto Shutoff, Child Lock, Blue Back, Picture Adjustments

Using the TV’s menus

AUTO SHUTOFF

You can set your TV to turn off if no signals are received for about 15 minutes or longer after the end of a broadcast.

1Press MENU Tto display the

“MENU 2” menu, then select “AUTO SHUTOFF”.

2Press MENU Mto select “ON”.

•The AUTO SHUTOFF function does not turn off the TV’s main power.

•The AUTO SHUTOFF will not work for a VIDEO mode.

You can disable the front control buttons of the TV.

When this function is set to “ON”, the TV can be operated using only the remote control.

Use this function to prevent children from operating the TV without parental consent.

2Press MENU Mto select “ON”.

To cancel the CHILD LOCK function, select “OFF”.

•The CHILD LOCK function is canceled when you turn the power off.

You can mute the sound and change the picture into a blue screen while no signals are received by the TV, or when the signals are unstable.

2Press MENU Mto select “ON”.

•To view a broadcast even when the reception signal is poor, set the BLUE BACK function to “OFF”.

•Even when the BLUE BACK function is set to “OFF”, the sound may not be audible.

You can adjust the picture as you like.

1Press MENU Tto display the “MENU 4” menu.

MENU 4

TINT

COLOUR

BRIGHT

CONT.

SHARP

SELECT BY	EXIT BY
OPERATE BY -+	DISPLAY

TINT* - : Reddish + : Greenish

COLOUR - : Lighter + : Deeper

BRIGHT - : Darker + : Brighter

CONT. - : Lower + : Higher

SHARP - : Softer + : Sharper

*TINT (tint) is displayed only when viewing images from NTSC3.58 or NTSC4.43 colour systems.