Display button, Return + button, Channel Scan button

Remote control buttons and functions

DISPLAY button

You can continuously display the current channel number or VIDEO mode on the screen.

•When selecting a channel or VIDEO mode with no input signal, indication of selected channel or VIDEO mode becomes fixed on the screen.

You can set a channel you frequently view to the Return Channel and you can view that channel at any time with one-touch.

To set the channel to the Return Channel:

1Select the channel you want to set to the Return Channel.

2Press this button and hold until the message “RETURN PLUS PROGRAMMED!” appears.

•When you turn off the TV, the Return Channel setting is cancelled.

•You can view two channels (current channel and Return Channel) alternately by pressing this button.

To cancel the Return Channel setting: Press this button and hold until the message“RETURN PLUS CANCELLED!” appears.

If no channel is set to the Return Channel:

You can view the channel selected right before the current channel by pressing this button.

You can quickly view all TV channels programmes that you can view on your TV, and search for the programme you want to view.

The TV channel programmes are each displayed for several seconds.

•The programmes of TV channels for which the SKIP function is set to “YES” are not displayed. (See page 15.)

2When you find the programme you want to view, press this button again to stop scanning.

You can turn the sound off instantly.

Press this button.

To turn the sound on, press this button again.

You can set the TV to automatically turn off after a set time.

•You can set the period of time to a maximum of 120 minutes in 10 minute increments.

•1 minute before the OFF TIMER function turns off the TV, “GOOD NIGHT!” appears.

To display the remaining time, press this button once.

To cancel the OFF TIMER function, press this button to set the period of time to 0.

•The OFF TIMER function will not turn off the TV’s main power.