![](/images/new-backgrounds/1178390/17839041x1.webp)
Setting the Day/Night Control
The table below explains the options on the DAY/NIGHT SETUP menu.
DAY/NIGHT SETUP
DAY/NIGHT SETUP |
| AUTO | ||
NIGHT MODE .. |
|
|
| ON |
> TDN DELAY | 0 |
|
| 10 |
! |
| |||
|
|
|
| |
PREVIOUS PAGE . |
|
| ||
|
|
|
Note This setting is dependent on the AGC setting (See >AGC on page 18).
>DAY/NIGHT SETUP Select either:
| <AUTO> (default) depending on light level, the camera automatically switches from |
| color to black and white. |
| <OFF> the camera stays color mode regardless of light level. |
| <ON> the camera stays in black and white mode regardless of light level. |
>CLR BURST | The CLR BURST screen determines the video signal type used when the camera |
| switches from color to black and white mode. The options are: |
| <ON> (default) B/W with color burst. |
| <OFF> B/W without color burst. |
|
|
>TDN DELAY | Sets the time period in seconds that the camera waits before switching modes. This |
| prevents unnecessary switching (for example, when an object passes briefly in front of |
| the camera.) |
|
|
Note Certain video recorders require color carrier/burst to operate.
Document | 21 |
04/08 |
|