Honeywell HD4UX manual Connecting the Wiring, Adjusting the Camera

Connecting the Wiring

Follow Figure 5 to connect the video and power wires.

Figure 5 Wiring Connection

Video: female BNC

Power

Red+

Black –

Note For secure installations, surface-mounted cables should be protected by plastic or metal cable covers.

Adjusting the Camera

To adjust the HD4U/X Camera:

1.Apply 12 VDC or 24 VAC power to the camera and monitor the video signal.

2.Loosen the screws that lock the gimbal assembly in place (see Figure 6).

3.Adjust the camera carrier to the desired view.

4.Tighten the screws to lock the gimbal assembly in place.

Note Orient the camera as shown in Figure 6 to maintain the correct picture orientation.

Document 800-00031 Rev A	13
04/08