152963991en per CH.qxp 03/08/2004 13.38 Pagina 15
Operating instructions
Filling the with salt
Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes.
This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.
To fill:
1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.
2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).
3.Using the funnel provided, pour in the salt until the container is full.
4.Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.
5.Screw on the cap tightly turning it clockwise until it stops with a click.
SALE ZOUT SALT SALZ SEL
SR14
The salt container will require topping up periodically.
The salt refilling is indicated by a flashing message in the display
REFILL SALT.
This occurs only during the setting mode and at the end of the washing programme: during the progress of the washing programme the indication for salt refilling is not active.
The salt indicator light on the control panel can remain illuminated for
Do not worry if water over flows from the unit when filling with salt, this is quite normal.
15
