GE JVM139K How To Use The Minute/Second T~Er, cooK1&llpad, The Minute/Second Timer, Defrost

HOW TO USE THE MINUTE/SECOND T~ER

The Minute/Second Timer

The Minute/Second Timer has three timing functions:

c It operates as a minute timer.

●It can be set to delay cooking.

●It can be used as a hold setting after defrosting.

The Minute/Second Timer operates without microwave energy.

Using a Holding Time

The Minute/Second Timer can also be used to program a “holding time” between microwave cooking functions .-The time can range from one second to 99 minutes and 99 seconds. A holding or standing time may be found in some of your own recipes~r in the Cooking Guide. -

How to Time a 3-Minute Phone Call

1.Touch MIN/SEC TIMER pad.

2.Touch number pad 3 and MINUTE pad (for 3 minutes and no seconds).

3.Touch START. Display shows time counting down. The timer signals when time is up.

Programming Delayed Cooking

To delay cooking up to 99 minutes and 99 seconds, touch either TIM-E COOK I & II, TEMP COOWHOLD or AUTO ROAST and enter cook time, temperature or code. Touch MIN/SEC TIMER and enter number of minutes to delay cooking. When delaying Temp

CooWold or Auto Roast cooking, be sure probe is in food. Touch START. Timer wfil count do-wn to zero and cooking will begin.

How to Defrost, Hold and Time Cook

Let’s say you want to defrost a frozen casserole for 15 minutes, hold for 10 minutes and then Time Cook for 25 minutes. Here’s how to do it:

Step 1: Take casserole from freezer and place in oven.

(—1 Ste~ 2: Touch TIME

I TIME DEFROST pad.

DEFROST I

m Step 3: Touch pads 1,5 and MINUTE for 15 minutes defrosting time. (Defrosting is automatically set on Power

~level 3 but c~n be ch~nged by touching the POWER LEVEL pad and the desired power level.)

Step 4: Set standing or hold

MIN/SEC time by touching MI N/SEC TIMER pad.

TIMER

Step 5: Touch 1, 0 and MINUTE to hold for ten minutes.

m Step 6: Touch TIME

cooK1&llpad

Ste~ 7: Touch 2, 5 and MINUTE for 25 minutes of cooiing time.

Step 8: Touch START. As each function is automatically

F performed, oven display shows instructions entered and the function. When time is up, the oven signals and flashes “End.”

10