Chapter 2: What To Do When Users | 2 | |
Cannot Receive EC500 Calls | ||
|
Introduction
Most problems reported by EC500 users are not likely to be problems with EC500 itself. In most cases, reported problems are caused by unexpected interaction between the Cellular Service Provider and EC500 features.
This chapter provides troubleshooting procedures to follow when users cannot receive EC500 calls on their cell phones.
A basic EC500 troubleshooting chart covering other possible problems that might be encountered with EC500 operation can be found in Chapter 1: Basic Troubleshooting, as can information on error codes you may see on your administrative terminal.
For test procedures used to verify the connection to the cell phone, see Chapter 4, “Installation and Administration Test” in theEC500 Release 3 Installation and Administration Guide.
Procedures for Users Who Cannot
Receive EC500 Calls on Their Cell
Phones
If an EC500 user is not able to receive EC500 calls on the cell phone, follow these procedures in the suggested order to isolate and fix the problem. After each step, you may want to verify that the problem has been fixed by making an EC500 call to the mapped cell phone.
1.Verify that you can call the cell phone from the switch. This also verifies that the user’s service contract with the Cellular Service Provider (CSP) is active, and that the user gets good coverage in that area.
Issue 3 January 2002
