AUTOmTIC ROASTmG
Auto Roast uses the temperature probe to cook to the desired serving temperature. Unlike Temp Coo~old, which uses a single power level, Auto Roast uses up to 3 power settings which automatically switch during roasting, thus providing even, tender cooking results without overcooking.
Just as in conventional roasting, only tender roasts should be roasted until specified internal temperatures are reached. Less tender roasts should be microwaved by time, according to the cookbook that comes with your oven.
Preparing Roasts for Auto Roasting
Place tender beef roast in cooking bag on trivet in
probe through cooking bag horizontally into the center meaty area not touching bone or fat. Make sure the handle does not touch the food or top or sides of the oven.
Place pork roast in cooking bag and place in
Place meat in oven with probe to the right. Insert cable end of probe firmly into receptacle on oven wall.
m
‘
How to Roast Beef to Medium
n 1. Touch AUTO ROAST pad.
AUTO ROAST Touch number pad 1. Touch
START. (See the “Auto Roast Guide” for complete list of recommended codes. )
NOTE: By touching the AUTO ROAST pad during cooking the
temperature will be
‘eatsinterna’m displayed. (“COOL”
wiil b: displayed until meat reaches 90°F. ) When pad is released, doneness code reappears on the display.
2.When you select Auto Roast codes I or 2, the oven signals with 4 beeps and “TURn” flashes on
the display when it’s timeII
to turn the roast over. m After you turn the roast, close the door and touch START. (NOTE: Oven continues to cook after the signal whether or not roast is turned over. )
3. After a
4 times and “HOLd” appears on the display.
4.Food will be held at this temperature for
60minutes. The oven then beeps 4 times and “End” appears.
20
