AEG 88070 manual Water inlet hose with safety valve

Models: 88070

1 44
Download 44 pages 62.11 Kb
Page 40
Image 40
Water inlet hose with safety valve

152963991en per CH.qxp 03/08/2004 13.39 Pagina 40

Installation instructions

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

-The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

-If water inlet hose or the safety valve is damaged, remove the mains plug immediately.

-A water inlet hose with safety valve must only be replaced by a specialist or by the consumer services department.

-Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve.

40

Page 40
Image 40
AEG 88070 manual Water inlet hose with safety valve