Step 1: Hooking up the system (continued)
Inserting two size AA (R6) batteries into the remote
]
Step 2: Setting the time
You must set the time before using the timer functions.
}
}
1 2,4 3,5
]
Tip
With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.
0 | ) | „ |
⁄Æ‚
When carrying this system
Do the following to protect the CD mechanism.
1Press FUNCTION repeatedly until “CD” appears in the display.
2Hold down PLAY MODE and press POWER so that "LOCK" appears in the display.
1 Press CLOCK/TIMER SET.
The hour indication flashes.
2 Turn the jog dial to set the hour.
The clock is on a
3 Press ENTER/NEXT.
The minute indication flashes.
4 Turn the jog dial to set the minute.
6