Sony MHC-RX90 Selecting tape length automatically, To check the order, To cancel Programme Edit

Page 25

To check the order

8 Press on the remote to insert a pause at the end of side A.

“P” appears in the display and the total playing time resets to “0.00” in the display.

9 Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to programme the remaining tracks to be recorded on side B.

10 Press CD SYNCHRO.

Deck B stands by for recording and the CD player stands by for playback. · (for front side) lights up.

11 Press EDIT/DIRECTION repeatedly to select A to record on one side. Select a (or RELAY) to record on both sides.

12 Press on deck B.

Recording starts.

To stop recording

Press on the deck B or on the CD player.

To check the order

Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears.

To cancel Programme Edit

Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display.

Tip

When you want to reduce the hiss noise in low-level high-frequency signals, press REPEAT/DOLBY NR so that “DOLBY NR B” appears after pressing CD SYNCHRO.

Selecting tape length automatically

—Tape Select Edit

You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing more than 20 tracks.

1 Insert a CD.

2 Press FUNCTION repeatedly until “CD” appears in the display.

3 Press EDIT/DIRECTION once, so that “EDIT” flashes.

The required tape length for the currently selected CD appears, followed by the total playing time and tracks for side A and side B.

Note

You cannot use this function after programming.

In order to use this function, you must first erase the programme (see “To clear the entire programme” on page 22).

25

Image 25

Contents 1996 by Sony Corporation 3-859-544-121Mini Hi-Fi Component System MHC-RX90This caution label is located inside the unit Sound Adjustment Table of ContentsOther Features Getting StartedGetting Started Step 1 Hooking up the system1Connect the speakers 2Connect the FM/AM aerials 3Connect the power cord to a wall outletTo attach the front speaker pads When carrying this system Step 2 Setting the time1 Press CLOCK/TIMER SET 1 2,4 3,5POWER 3,5 6 Step 3 Presetting radio stations5 Press ENTER/NEXT TipsConnecting audio components Connecting optional AV componentsStep 3 Presetting radio stations continued 2 Press TUNING MODE repeatedly to select “AUTO”Connecting an MD deck for analog recording Connecting a VCRConnecting a super woofer speaker Connecting optional AV components continued Connecting outdoor aerialsFM aerial AM aerial2 1 Æ‚ Playing a CDBasic Operations Normal playTips Playing a CD continuedDo this CD Synchro Recording Recording a CD2 Press § OPEN/CLOSE and place a CD 3 Press CD SYNCHROListening to the radio Preset Tuning3 Turn the jog dial to tune in a preset station To listen to non-presetradio stationsRecording from the radio 1 Press TUNER/BAND to select the band you wantRecording from the Radio continued Playing a tapeTo stop recording Basic Operations 3 Press ·High-speedDubbing Recording from a tape2 Press HIGH SPEED DUBBING 4 PressTo cancel Repeat Play Using the CD displayPlaying the CD tracks repeatedly The CD PlayerPlaying the CD tracks in random order To cancel Shuffle PlayShuffle Play To select a desired CDProgramming the CD tracks To cancel Programme Play„ Programme PlayPlaying CDs without interruption To cancel Non-StopPlayProgramming the CD tracks continued Non-StopPlay/Applause MixThe Tape Deck Recording on a tape manually1 Insert a blank tape into deck B 3 Press rProgramme Edit Recording a CD by specifying track orderSelecting tape length automatically To cancel Programme EditTo check the order TapeSelect EditTo adjust the flash length To adjust the loop lengthLooping part of a CD Flashing part of a CDTo adjust the wave length Using the drum padsTo adjust the volume of the pads Waving the equalizerTo cancel the beat Using the beat functionTo change the beat volume To change the speedSound Adjustment Adjusting the soundFor a powerful sound GROOVE To listen through the headphonesSelecting the audio emphasis To cancel the effect1 Press MUSIC, MOVIE, or GAME to select a menu Music menu optionsAdjusting the graphic equalizer Adjusting the audio emphasisTo change the equalizer display 3 Turn the jog dial to adjust level Adjusting the Audio Emphasis continued5 Press ENTER/NEXT when finished Activating the surround effectPersonalfile Making a personal audio emphasis file2 Press MEMORY 4 Press ENTER/NEXTSonicformation Switching the Speaker FormationNORMAL mode WHISPER modeFRONT ONLY mode LINK modeOther Features Using the Radio Data System RDSWhat is the Radio Data System? Receiving RDS broadcastsALARM To cancel PTY searchList of programme types PTY AFFAIRSSinging along Karaoke When you are doneMixing and recording sounds When you choose auto Sleep TimerTo cancel the Sleep Timer function Falling asleep to music2 Adjust the volume 3 Press CLOCK/TIMER SET Wake-upTimer9 Turn off the power Waking up to musicTo check the setting Timer-recordingradio programmesTo cancel the timer operation 2 Press CLOCK/TIMER SET6 Insert a recordable tape 7 Turn off the power Timer-recordingradio programmes continued4 Set the time to start recording To check the settingOn safety PrecautionsOn placement Cleaning the cabinetPrecautions continued TroubleshootingWhen using a tape longer than 90 minutes Cleaning the tape headsSpeakers The timer does not functionCD Player There is severe hum or noiseTape Deck Troubleshooting continuedTuner The tape does not recordAmplifier section SpecificationsCD player section Tape player sectionSpeaker Specifications continuedGeneral Surround Speaker SS-SR101F, G IndexH, I, J L, M