Grundig LXW 70-8620 Setting television channels automatically, Changing stored channels, Settings

The television set is equipped with an automatic channel search system.

You start the search and can then sort the television channels into your order of preference.

99 preset positions are provided, to which you can assign television channels from the antenna or from the cable connection.

1Switch on the television with »￿« on the television set, then press »P+« on the remote control.

–The »Sprache« (Menu language) menu appears when the television is first switched on.

Hint:

If the »Sprache« (Menu language) menu does not appear on the screen, then set it in accordance with the chapter on reset- ting all television channels on page 31.

2Select language with »P+«, »P-«, »￿« or »￿« and press »OK« to confirm.

–The »Country« menu appears.

3Press »P+«, »P-«, »￿« or »￿« to select the country and »OK« to confirm.

–The search begins. It may last a few minutes, depending on the number of television stations found.

–After the search the television switches to channel position 1 and the »Program table« menu appears.

Changing stored channels

You can delete channels that have been stored more than once during the automatic search. You can also store channels in a diffe- rent preset position, change or enter the name of a channel as well as skip channels.

Deleting channels

1 In the »Program table« menu, select the station to be deleted with »P+«, »P-«, »￿« or »￿«.

2Highlight the channel with »￿« (yellow).

3Press »￿« (yellow) to delete the channel.

Note:

To delete other stations, repeat steps 1 and 3.